Abstract:Ideal cavities face a high risk of erosion in relation to pneumatic conveying. To reduce erosion, we introduce a height difference in the cavity, with the leading wall higher than the aft wall. To improve the cavity structure, the URANS (SST)-DPM method is adopted to study the effect of height difference h on gas flow, particle distribution, and particle erosion of a horizontal ideal cavity. The simulation procedure is validated by comparing the computational fluid dynamics results with experimental results. The results of the gas flow modeling show that the shear layer impinges on the aft wall when h is relatively small, and re-attaches on the downstream bottom wall as h increases. The re-attachment length is initially identical to the cavity width, then increases uniformly with h. Results of the particle distribution simulations indicate that for a Stokes number (St) of 0.12, the particles are evenly distributed in the cavity, and the distribution is independent of h; for St=1.2, dominated by the centrifugal force, the particles are mainly concentrated along the periphery of the main vortex when h is small. Owing to the variation of the main vortex, as h increases, more particles will fall down into the main vortex. For St=9.1, where gravity is dominant, the particles collide on the aft wall and rebound into the cavity through the main vortex when h is small. Otherwise, particles will move forward and only a few particles appear in the cavity. We explored the erosion distribution on the downstream bottom walls and extracted and analyzed the initial erosion positions. We also investigate the erosion on the aft walls, and the results indicate that lowering the aft wall even slightly will significantly reduce erosion.

Time-scaled Study on the Erosion in Circulating Fluidized Bed Based on CPFD Method

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

Particle-Scale Investigation of Heat Transfer and Erosion Characteristics in a Three-Dimensional Circulating Fluidized Bed

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Research on Material Erosion of Circulating Fludized Bed

Analysis of Erosion Characteristic in Rectangular Circulating Fluidized Bed

CFD–DEM Simulation of Tube Erosion in a Fluidized Bed

Numerical study of solid particle erosion on sidewall

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Experimental and Numerical Investigation on Erosion of Circular and Elliptical Immersed Tubes in Fluidized Bed

Prediction on Erosion Rate of Immersed Tube in a Fluidized Bed by Simulation

Numerical Investigation of the Erosion Behavior in Blades of Tidal Current Turbine

Multiscale investigation of tube erosion in fluidized bed based on CFD-DEM simulation

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Influences of Secondary Air on Erosion in Rectangular Circulating Fluidized Bed Boiler

A Comprehensive Numerical Investigation on the Hydrodynamics and Erosion Characteristics in a Pressurized Fluidized Bed with Dense Immersed Tube Bundles

Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid

CPFD simulation of circulating fluidized bed risers

Particle-Scale Investigation of the Hydrodynamics and Tube Erosion Property in A Three-Dimensional (3-D) Bubbling Fluidized Bed with Immersed Tubes

Material erosion of transition region in circulating fluidized bed