Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

A Comprehensive Numerical Investigation on the Hydrodynamics and Erosion Characteristics in a Pressurized Fluidized Bed with Dense Immersed Tube Bundles

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Particle-Scale Investigation of the Hydrodynamics and Tube Erosion Property in A Three-Dimensional (3-D) Bubbling Fluidized Bed with Immersed Tubes

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical simulation for character of fluid flow through packed bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Heat Transfer and Erosion Mechanisms of an Immersed Tube in a Bubbling Fluidized Bed: A LES–DEM Approach

Discrete Element Simulation of the Hydrodynamics in A 3d Spouted Bed: Influence of Tube Configuration

Particle-Scale Investigation of Heat Transfer and Erosion Characteristics in a Three-Dimensional Circulating Fluidized Bed

Investigation of Gas-Solid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEM-LES Coupling Approach

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Numerical study of solid particle erosion on sidewall

Prediction on Erosion Rate of Immersed Tube in a Fluidized Bed by Simulation

Multiscale investigation of tube erosion in fluidized bed based on CFD-DEM simulation

Computational Fluid Dynamics–Discrete Element Method Investigation of Pressure Signals and Solid Back-Mixing in a Full-Loop Circulating Fluidized Bed