Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. At present, the traction force and traction speed of the drilling robot cannot be controlled. However, if the speed of the drilling robot is too high, the bit will be damaged because of the shock load. If the speed of the drilling robot is too low, the drilling efficiency will be very low. The existing control system and control algorithm of the drilling robot cannot meet the requirements of the drilling conditions. A control system of the weight on bit and the rate of penetration of the drilling robot was invented. On the basis, a dual-loop fuzzy proportional integral derivative (PID) control algorithm of the pressure difference and flow rate was proposed to control the weight on bit and rate of penetration. Furthermore, the simulation model of the dual-loop fuzzy PID control algorithm was established. It is found that the proposed dual-loop fuzzy PID control algorithm has the characteristics of small overshoot and good tracking. Furthermore, the correctness of the theory was verified by the experiments. The experiments show that the average amplitude of rate of penetration vibration by using adaptive PID controller is less than 50% of that of PID controller. The maximum weight on bit with the adaptive PID controller is only 45.94% of that of the conventional PID controller. The overshoot of the adaptive PID controller is only 24.07% of that of the conventional PID controller. At the same time, the vibration amplitude of the conventional PID controller is obviously larger than that of the adaptive PID controller. The proposed adaptive PID controller in this paper can effectively reduce the vibration of the bit. By reducing the vibration of the bit, the life of the bit can be extended. Finally, it is of great significance to realize the efficient and intelligent drilling process.

Study on 6-DOF Active Vibration-Isolation System of the Ultra-Precision Turning Lathe Based on GA-BP-PID Control for Dynamic Loads

H<sub>∞</sub>/μ Robust Control of Vibration for an Ultra-Precision Grinding Machine

H∞/μ Robust Control of Vibration for an Ultra-precision Grinding Machine

BASIC THEORY AND TECHNOLOGY IN THE ACTIVE VIBRATION ISOLATION OF PRECISION DEVICES

Preliminary Exploration on Control Theory of Ultraprecision Stage with Large Travel

Active Pneumatic Vibration Control By Using Pressure And Velocity Measurements And Adaptive Fuzzy Sliding-Mode Controller

Active Control for Unbalanced Vibration Control of Electric Spindle-Tool System

Micro-Vibration Control for Ultra-Precision Isolation Platform of Large Grating Ruling Engine

Performance Enhancement Of Pneumatic Vibration Isolators Using Self-Tuning Pid Feedback And Time-Delay-Control (Tdc)-Based Feedforward Scheme

Active Vibration Suppression Based on Intelligent Control for a Long-Range Ultra-Precise Positioning System

Design of an Active Vibration Isolation Control Strategy Based on IFT Method

Adaptive Wavelet Neural Network Controller for Active Suppression Control of a Diaphragm-Type Pneumatic Vibration Isolator

Modeling and semi-active control performance analysis of MRE isolator based on BPNN optimized by GA using different evaluation indexes

Research On The Turning Vibration Control System Based On Giant Magnetostrictive Actuator

Dynamic simulation and active vibration control design of an ultra-precision fly-cutting machine tool

A Closed-Loop Dynamic Controller for Active Vibration Isolation Working on A Parallel Wheel-Legged Robot

Lateral Vibration Control of Ball Screw Feed System Considering the Nut Location

Active Vibration Control For Milling Processes

Control algorithm of weight on bit and rate of penetration based on drilling robot

Gain scheduling control of ball screw feed drives based on linear parameter varying model

Dual PID Adaptive Variable Impedance Constant Force Control for Grinding Robot