Abstract:In the gas metal arc welding (GMAW) process, metal transfer dynamics, influenced by wire material properties such as electrical conductivity and surface tension, serve as key sources of mass and heat for metal deposition on substrates. To elucidate the role of these material properties on metal transfer dynamics from a driving force perspective, this study examined molten droplet elongation across five distinct wires: Al, Cu, Fe, Ni, and Ti. Additionally, a unique non-transferred arc welding setup equipped with a consumable wire anode and two tungsten cathodes was introduced, allowing for observations at minimized arc lengths and preventing current concentration in molten droplets. For Al and Cu wires, while only projected-spray transfer was observed under sufficient arc length conditions, a shift to minimized arc length resulted in significant droplet elongation and a transition to streaming-spray transfer. This contrast emphasized the impact of high electrical conductivity in reducing the internal gradient of electromagnetic pressure and inhibiting the occurrence of streaming-spray transfer. Further substantiating this mechanism, Fe, Ni, and Ti wires revealed that higher electrical conductivity corresponded to an increased transition current to streaming-spray transfer. Additionally, surface tension played a crucial role in the formation of molten droplets and ensured transfer stability, with its influence varying at different current levels. These insights contribute to our comprehensive understanding of arc plasma and molten metal interactions. Our study proposes material-specific strategies to optimize metal transfer dynamics, leading to enhanced control over weld bead formation and overall mechanical properties of welded joints in the GMAW.

The Effects of Welding Parameters on Metal Transfer and Bead Properties in the Variable-Polarity GMAW of Mild Steel

Welding polarity effects on weld spatters and bead geometry of hyperbaric dry GMAW

Effects of Welding Speed and Pulse Frequency on Surface Depression in Variable Polarity Gas Tungsten Arc Welding of Aluminum Alloy

Influence of controlled and conventional short circuit waveforms on mechanical and microstructural effects in the gas metal arc welding processes

Effect of high-frequency phase shift on metal transfer and weld formation in aluminum alloy double-wire DP-GMAW

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

The Effects of Processing Parameters during the Wire Arc Additive Manufacturing of 308L Stainless Steel on the Formation of a Thin-Walled Structure

Effect of welding parameters on microstructure and mechanical properties of mild steel components produced by WAAM

Investigation on the Dynamic Behavior of Weld Pool and Weld Microstructure During DP-GMAW for Austenitic Stainless Steel

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods

Comparative Study of Droplet Transfer Modes on Appearance, Microstructure, and Mechanical Properties of Weld During Pulsed GMAW

Mechanisms of Gravitational Influence on Weld Pool Behavior and Weld Bead Performance in Variable Polarity Plasma Arc Welding across Different Welding Position

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

Microstructure and Mechanical Properties of a Weld Seam from Magnetron High-Current CO2 Welding

Effects of Arc Length Adjustment on Weld Bead Formation and Droplet Transfer in Pulsed GMAW Based on Datum Current Time

Role of material properties on metal transfer dynamics in gas metal arc welding

Effects of He-Ar shielding gas compositions on arc plasma physical properties in rotating laser + GMAW hybrid fillet welding: Numerical simulation

Effect of current configuration on weld properties and microstructure in synchronised twin-wire pulsed MAG welding

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Effect of Position of Robotic Gas Metal Arc Welding on Bead Quality and Multi-objective Optimization Through Gray Relational Analysis

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding