Abstract:Additive manufacturing (AM) is accepted as a transformative technology for rapid production of parts based on digital models through direct printing of a range of materials (e.g., metals, polymers, and ceramics). Recent advancements in the binder-jetting AM process (i.e., 3D sand-printing (3DSP)) enables direct production of sand molds and cores for metal casting. AM has been attractive to manufacturers due to the ability to produce complex and customized parts in low batch production. Traditional mold design for gravity castings experience higher scrap rates due to challenges in controlling turbulence and air entrapment. In this research, mathematically designed sprue geometries that can be produced via 3DSP are presented along with their effect on mechanical and metallurgical properties of castings through numerical modeling, computational simulation, and experimental validation. The casting properties are contrasted to conventional straight sprue castings for two different alloys: aluminum alloy 319 and gray cast iron class 30. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), computed tomography scanning (CT), and 3-point bending tests are performed to characterize microstructure, casting defects, elemental composition, and mechanical properties for castings of each gating system design. For aluminum alloy 319, a statistically significant increase of 10% in flexural strength was found using the conical-helix sprue geometry as well as a reduction of 25% in casting defects. In gray cast iron class 30, no statistically significant differences are found between the flexural strength of the conical-helix and benchmark straight sprue as expected in a short freezing range alloy.

3D-Printed Shell-Truss Sand Mold for Aluminum Castings

Controlled Cooling of an Aluminum Alloy Casting Based on 3D Printed Rib Reinforced Shell Mold

The Design of 3D-Printed Lattice-Reinforced Thickness-Varying Shell Molds for Castings.

Study on the Mechanical Properties of 3D-Printed Sand Mold Specimens with Complex Hollow Structures

Effects of Hollow Structures in Sand Mold Manufactured Using 3D Printing Technology

Additive manufacturing-driven mold design for castings

Cooling Control for Castings by Adopting Skeletal Sand Mold Design

Research on frozen sand mold casting technology for complex thin-walled aluminum alloy castings

Effects of Hollow Sand Mold on the Microstructure and Mechanical Properties of a Low Pressure Aluminum Alloy Casting

Insulation Effect of Air Cavity in Sand Mold Using 3D Printing Technology

Effect of Double-Layer-shell Sand Mold on the Residual Stress of Casting and Itself Crack Tendency

Modeling and Simulation of the Casting Process with Skeletal Sand Mold

Promoting sustainability in 3D printed sand casting through adaptive sand mold structures

Effect of freezing range on reducing casting defects through 3D sand-printed mold designs

Digital High-Efficiency Print Forming Method and Device for Multi-Material Casting Molds

Non-conventional mold design for metal casting using 3D sand-printing

Metal casting into NaCl molds fabricated by material extrusion 3D printing

Assessment of the effect of 3D printed sand mold thickness on solidification process of AlSi13 casting alloy

Toward Reducing Casting Defects via 3D Risers via 3D Sand-Printing: A Simulation Study

Elimination of cracks in stainless steel casings via 3D printed sand molds with an internal topology structure

The design and additive manufacturing of an eco-friendly mold utilized for high productivity based on conformal cooling optimization