Abstract:Additive manufacturing (AM) is a fabrication technique that digitally deposits materials in layers to form a desired 3D structure or shape. It is not as wasteful in materials compared to digital subtractive manufacturing (SM). In 3D printing, complex and unique metallic structures, more energy intensive and expensive techniques such as selective laser melting (SLM) or electron beam melting (EBM) are often used. As metals are an important class of materials used in AM, there is a need for safer and relatively less expensive 3D printing alternatives for widespread adoption. Material extrusion AM methods include fused deposition modeling (FDM) and direct ink writing (DIW), where thermal and viscosity parameters are used to optimize printing. This study presents a materials extrusion precursor route on 3D printing metallic structures with a biodegradable cellulose hydrogel and safer water-based composite ink containing irregularly shaped metallic powders and carboxymethyl cellulose (CMC-Na). Montmorillonite clay and guar gum additives were used to modify the ink viscosity during extrusion and provide post 3D printing structural integrity and stability. By using this composite ink, a part can be made with 75–80% metal composition for sintering. The sintering process at 1050 and 985 °C for 316L stainless steel (316LSS) and copper (Cu), respectively, removes the cellulose hydrogel, leaving a 100% metal. Large interconnected open and closed pores were formed for both approaches: 316LSS and Cu each had a total of about 31.92% and 32.07% porosity, respectively. Total closure of pores was not achieved and a small shrinkage was observed in both samples. The elastic modulus of the 3D-printed 316LSS structure was measured 0.053 GPa. A number of potential uses for optimized porous metallic structures, particularly in biomedical and energy applications are also discussed.

Metal casting into NaCl molds fabricated by material extrusion 3D printing

3D Printing of Salt as a Template for Magnesium with Structured Porosity

Metal casting using soluble pattern produced via additive manufacturing

3D-Printed Shell-Truss Sand Mold for Aluminum Castings

The Design of 3D-Printed Lattice-Reinforced Thickness-Varying Shell Molds for Castings.

Study on the Mechanical Properties of 3D-Printed Sand Mold Specimens with Complex Hollow Structures

Effect of freezing range on reducing casting defects through 3D sand-printed mold designs

Digital High-Efficiency Print Forming Method and Device for Multi-Material Casting Molds

3D printing of high-strength water-soluble salt cores via material extrusion

Characterization of Slurry-Cast Layer Compounds for 3D Printing of High Strength Casting Cores

Controlled Cooling of an Aluminum Alloy Casting Based on 3D Printed Rib Reinforced Shell Mold

Manufacturing of High Pressure Die Casting Die Inserts Using SLM

Embedded 3D printing and pressurized thermo-curing of PMMA for medical implants

3D printing of metals using biodegradable cellulose hydrogel inks

Non-conventional mold design for metal casting using 3D sand-printing

3D printing of release-agent retaining molds

3D printed metal molds for hot embossing plastic microfluidic devices

Effects of Hollow Structures in Sand Mold Manufactured Using 3D Printing Technology

Promoting sustainability in 3D printed sand casting through adaptive sand mold structures

Water-Soluble Sand Core Made by Binder Jetting Printing with the Binder of Potassium Carbonate Solution

Electroforming of Personalized Multi-Level and Free-Form Metal Parts Utilizing Fused Deposition Modeling-Manufactured Molds