Abstract:HZSM-5 zeolites with Si/Al ratios of 20, 35, 50 and 65 were prepared by the directing crystallization process of silicalite-1 seeds. The influence of Si/Al ratios on the production of benzene, toluene, xylene and naphthalene (BTXN) originated from asphaltenes catalytic pyrolysis was explored by adopting Py-GC/MS. Modified Z5-50 zeolites were prepared by various metal ions (Ni2+, Mo6+, Fe3+, and Co2+) with different loading rates (3 % (mass), 5 % (mass), 7 % (mass), and 9 % (mass)) and the physical and chemical properties of these zeolites were characterized by XRD, SEM, ICP-OES, XPS, NH3-TPD, FTIR, Py-IR and N2 adsorption-desorption isotherm. In addition, they were employed to catalyze the conversion of asphaltenes pyrolysis production to BTXN using Py-GC/MS. Results show that the highest relative content of aromatics has been obtained over HZSM-5 with Si/Al ratio of 50 (Z5-50), reaching 61.87%. Besides, the loading of Ni, Mo, Fe, and Co on Z5-50 leads to an increase of acid strength and provides new active sites. The relative content of BTXN increases by 3.17% over 3Ni-Z5, which may be ascribed to that Ni promoted the conversion of polycyclic aromatic hydrocarbons (PAHs) to monocyclic aromatics due to the cracking of aliphatic side chains of PAHs and the decrease of phenolic activation energy. While under the catalysis of 5Mo-Z5, the relative content of aromatics and BTXN augmented by 5.75% and 4.02%, respectively. In addition, the highest relative content of aromatics reaches 70.09% when the loading rate of Fe was 7 % (mass), and the relative content of BTXN increases from 25.87% to 29.42%. The results demonstrate that the active sites provided by different metal species expressed diverse effects on BTXN. Although the Brønsted/Lewis acid ratios of HZSM-5 modified by metal decreased, the acid strength and the relative content of BTXN both increased, which illustrated that there is a synergistic catalysis with the Brønsted acid sites and Lewis acid sites provided by metal species. In general, the performance of the catalyst is affected by the pore structure, acidity and metal active sites. Moreover, the possible formation mechanism of BTXN derived from asphaltenes catalytic pyrolysis was proposed on the basis of structural features and catalytic performances of a series of zeolites.

Multi-Zone Conversion for the Maximizing Production of Btx from Naphtha

Multiobjective Optimization of the Industrial Naphtha Catalytic Reforming Process

Efficient Conversion of Methane to Aromatics in the Presence of Methanol at Low Temperature

Aromatization of n-Butane and i-Butane over PtSnK/ZSM-5 Catalysts: Influence of SiO2/Al2O3 Ratio

Mechanism of catalytic conversion of kerosene co-refining heavy oil to BTEXN by Py-GC/MS based on "point-line-surface-body" step by step research strategy

Efficient conversion of benzene and syngas to toluene and xylene over ZnO-ZrO2&H-ZSM-5 bifunctional catalysts

Enhancing light olefins and aromatics production from naphthenic-based vacuum gas oil: Process integration, techno-economic analysis and life cycle environmental assessment

Fully-Exposed Pt Cluster@Zeolite Catalysts for Efficient N-Hexane Aromatization

Development and catalytic mechanism of a highly efficient Pt/Kβ catalyst for n-Heptane aromatization

Molecular Modeling and Optimization for Catalytic Reforming

Catalytic conversion of polyethylene into aromatics with Pt/ZSM-5: insights into reaction pathways and rate-controlling step regulation

CO2-Assisted in situ hydrogen extraction for highly selective aromatization of n-Hexane over Zn modified HZSM-5 catalyst

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Catalytic conversion of asphaltenes to BTXN using metal-loaded modified HZSM-5

Preferential Synthesis of Toluene and Xylene from CO 2 Hydrogenation in the Presence of Benzene through an Enhanced Coupling Reaction

Catalytic Hydrocracking Reactions of Tetralin Biomass Tar Model Compound to Benzene, Toluene and Xylenes (BTX) Over Metal-Modified ZSM-5 in Ambient Pressure Reactor

Pt3Mn/SiO2 + ZSM-5 Bifunctional Catalyst for Ethane Dehydroaromatization

Catalytic conversion of heavy naphtha to reformate over the phosphorus-ZSM-5 catalyst at a lower reforming temperature

Selective regulation of Pt clusters inside KY zeolite using atomic layer deposition for n-octane reforming

One-step conversion of crude oil to light olefins using a multi-zone reactor

Hierarchically structured Pt/K-Beta zeolites for the catalytic conversion of n-heptane to aromatics