Abstract:Manganese is a fundamental metal raw material that plays a crucial role in sustainable economic and social development. With the battery industry undergoing rapid advancements in the recent years, there has been a consistent rise in the demand for manganese. This study proposes a new scheme for selectively extracting manganese from pyrolusite by the sulfation roasting-water leaching process, while the iron is enriched in the leaching residues in the form of Fe2O3. With a 1.5:1 mass ratio of ammonium sulfate to pyrolusite, a roasting temperature of 650 degrees C, and a duration of 120 min, the extraction efficiency of manganese was observed to be 96.15%, while iron extraction was only 1.45%. And the leaching residues containing mainly 54.62% SiO2 and 36.10% Fe2O3 were obtained, which could be enriched with iron by flotation. Subsequently, the purified leaching solution was subjected to manganese precipitation using ammonium bicarbonate. Under optimal conditions, the precipitation efficiency of manganese was 99.63%, and the manganese carbonate products were obtained with a particle size of approximately 1-1.5 mu m spherical structure, which met the requirements of the industrial manganese carbonate quality standard (HG/T4203-2011). The mechanism studies have proven that MnO2 in pyrolusite was first converted to (NH4)2Mn2(SO4)3 and then to MnSO4, while Fe2O3 was converted to (NH4)3Fe (SO4)3, NH4Fe(SO4)2, Fe2(SO4)3 in turn and finally decomposed to Fe2O3. The ammonia produced during the roasting process can be absorbed to regenerate ammonium sulfate products, and the filtrate from the manganese precipitation can also be crystallized by evaporation to obtain ammonium sulfate products, both of which can be used in the roasting process to reduce production costs. The process of this study proposed is simple and does not require any strong acid or alkali reagents. It offers high efficiency, is environmentally friendly, and is easy to operate, thus providing a new idea and scheme for the multi-component resource utilization of manganese oxide ore.

An Efficient and Clean Method for the Selective Extraction and Recovery of Manganese from Pyrolusite Using Ammonium Sulfate Roasting-Water Leaching and Carbonate Precipitation

An Environmentally Friendly Approach for the Extraction and Recovery of Mn from Pyrolusite by Ammonium Sulfate Roasting‐water Leaching and Ammonium Carbonate Precipitation

Efficient Extraction of Manganese from Low-Grade Pyrolusite by a Sawdust Pyrolysis Reduction Roasting-Acid Leaching Process

High-efficiency and Environment-Friendly Separation and Recovery of Manganese from Braunite Via the Ammonium Sulfate Roasting-Water Leaching Process: Behavior and Mechanism

Extraction of Manganese from Iron Rich Mno2 Ores Via Selective Sulfation Roasting with So2 Followed by Water Leaching

Extraction of Iron and Manganese from Pyrolusite Absorption Residue by Ammonium Sulphate Roasting–Leaching Process

Manganese Extraction from Low-Grade Pyrolusite by Roasting with H 2 SO 4

Novel Process For Utilizing Low-Grade Manganese Oxide Ores By Sulfur-Based Reduction Roasting-Acid Leaching

Manganese Extraction by Sulfur-Based Reduction Roasting–acid Leaching from Low-Grade Manganese Oxide Ores

A Sustainable Low-Temperature Roasting and Water Leaching Process for Simultaneously Extracting Mn, Cu, Co, and Ni from Ocean Manganese Nodules

A Process for Extraction of Manganese from Manganese Oxide Ores by a Novel and Efficient Roasting-Acid Leaching Technique

The Extraction of Valuable Metals and Phase Transformation and Formation Mechanism in Roasting-Water Leaching Process of Laterite with Ammonium Sulfate

An Innovative Method for the Efficient and Selective Extraction of Co, Ni, Cu, and Mn from Oceanic Cobalt-Rich Crusts by Ammonium Sulfate Roasting: Behavior, Roasting Kinetics and Mechanism

Study on the high-efficiency separation of Fe and Mn from low-grade pyrolusite and the preparation of LiMn2O4 materials for lithium-ion batteries

Extraction of Manganese Oxide Ore by a Reduction Acidolysis-Selective Leaching Method

Effective separation of Zn, Fe, and Mn from roasting-water leaching solution of blast-furnace dust using a precipitation-solvent extraction process

Manganese extraction from high-iron-content manganese oxide ores by selective reduction roasting-acid leaching process using black charcoal as reductant

Microwave efficient extraction of manganese from low-grade pyrolusite by pyrite reduction acid leaching process

Cyclic process for leaching manganese by sulfation roasting of manganese oxide ore

High Efficiency and Cost-Effective Innovative Self-Oxidation In-Situ Removal Scheme for the Preparation of Battery-Grade Manganese Sulphate

Recovery of Manganese by Roasting-Ammonia Leaching from Low-Grade Manganese Carbonate Ores