Abstract:CsPbIBr2 perovskite, as a promising light harvester, possesses the most balanced bandgap and stability characters among all-inorganic perovskite materials. However, the poor quality of the traditionally one-step solution-processed CsPbIBr2 film always leads to a severe recombination loss and thus a low output potential difference (V oc). Herein, we demonstrate a novel vapor-assisted deposition strategy to construct high-quality CsPbIBr2 films for the first time, in which the crystallization kinetics of the CsPbIBr2 is more easily controllable than that of the one-step spin-coated one. The PbBr2 film acting as the template in the CsPbIBr2 crystal growth is firstly prepared via an antisolvent-washing technique and CsI is then vacuum evaporated onto the PbBr2 layer. By precisely tuning the thickness of the CsI film, highly phase-pure and crystallized CsPbIBr2 crystals are successfully obtained. The optimized CsPbIBr2 film also exhibits a homogeneous morphology and full coverage over the substrate with large grain sizes up to microscale and ultrahigh light absorption capability. The corresponding carbon-based CsPbIBr2 solar cells achieve a champion power conversion efficiency of 8.76% with a superior V oc of 1.289 V. The large-area (1 cm2) devices also deliver an efficiency of 6.78% with an impressive V oc of 1.336 V. Moreover, under the protection of the highly hydrophobic and chemically stable CuPc layer and carbon counter electrode, the unencapsulated devices present excellent moisture and thermal stabilities. Our work provides a new approach for the preparation of cost-effective, highly efficient and robust CsPbIBr2 photovoltaics.

Precursor Engineering Enables High-Performance All-Inorganic CsPbIBr2 Perovskite Solar Cells with a Record Efficiency Approaching 13%

Vapor-assisted deposition of CsPbIBr2 films for highly efficient and stable carbon-based planar perovskite solar cells with superior Voc

Tailored Phase Transformation of CsPbI2Br Films by Copper(II) Bromide for High-Performance All-Inorganic Perovskite Solar Cells.

CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability.

Cspb0.9sn0.1ibr2 Based All-Inorganic Perovskite Solar Cells With Exceptional Efficiency And Stability

Efficient Perovskite Solar Cells Fabricated Through CsCl-Enhanced PbI2 Precursor Via Sequential Deposition.

Preparation of Highly Efficient and Stable All-Inorganic CsPbBr3 Perovskite Solar Cells Using Pre-Crystallization Multi-Step Spin-Coating Method

Improvement of Colloidal Characteristics in a Precursor Solution by a PbI2-(DMSO)2 Complex for Efficient Nonstoichiometrically Prepared CsPbI2.8Br0.2 Perovskite Solar Cells

Manipulating the Crystallization and Phase Transition for High-Performance CsPbI<sub>2</sub>Br Solar Cells

Highly Crystalline CsPbI2Br Films for Efficient Perovskite Solar Cells Via Compositional Engineering

Ionic Liquid Surface Treatment-Induced Crystal Growth of CsPbIBr2 Perovskite for High-Performance Solar Cells

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

Application of Cesium on the Restriction of Precursor Crystallization for Highly Reproducible Perovskite Solar Cells Exceeding 20% Efficiency

n-type absorber by Cd2+ doping achieves high-performance carbon-based CsPbIBr2 perovskite solar cells

Highly efficient and stable inorganic CsPbBr3 perovskite solar cells via vacuum co-evaporation

Guanidinium iodide modification enabled highly efficient and stable all-inorganic CsPbBr3 perovskite solar cells

Oxalate Pushes Efficiency of CsPb 0.7 Sn 0.3 IBr 2 Based All‐Inorganic Perovskite Solar Cells to over 14%

Extending the Absorption Spectra and Enhancing the Charge Extraction by the Organic Bulk Heterojunction for CsPbBr 3 Perovskite Solar Cells

Tailoring C60 for Efficient Inorganic CsPbI2 Br Perovskite Solar Cells and Modules

Bifunctional Lewis Base‐Assisted Fabrication of High‐Quality CsPbIBr2 Perovskite for Efficient and Stable Solar Cells