Abstract:Summary Only 3 to 10% of gas from tight shale is recovered economically through natural depletion, demonstrating a significant potential for enhanced shale-gas recovery (ESGR). Experimental studies have demonstrated that shale kerogen/organic matter has higher affinity for carbon dioxide (CO2) than methane (CH4), which opens possibilities for carbon storage and new production strategies. This paper presents a new multicomponent adsorption isotherm that is coupled with a flow model for the evaluation of injection/production scenarios. The isotherm is dependent on the assumption that different gas species compete to adsorb on a limited specific surface area. Rather than assuming a capacity of a fixed number of sites or moles, this finite surface area is filled with species taking different amounts of space per mole. The final form is a generalized multicomponent Langmuir isotherm. Experimental adsorption data for CO2 and CH4 on Marcellus Shale are matched with the proposed isotherm using relevant fitting parameters. The isotherm is first applied in static examples to calculate gas-in-place reserves, recovery factors (RFs), and enhanced gas-recovery (EGR) potential according to the contributions from free-gas and adsorbed-gas components. The isotherm is further coupled with a dynamic flow model with application to CO2/CH4 substitution for CO2-ESGR, assuming only a gas phase exists in the system. We study the feasibility and effectiveness of CO2 injection in tight shale formations in an injection/production setting representative of laboratory and field implementation and compare that with regular pressure depletion. The production scenario we consider is a 1D shale-core or matrix system first saturated with free and adsorbed CH4 gas with only the left-side (well) boundary open. During primary depletion, gas is produced from the shale to the well by advection and desorption. This process tends to give low recovery and is entirely dependent on the well pressure. Stopping production and then injecting CO2 into the shale leads to an increase in pressure, where CO2 is preferentially adsorbed over CH4. The injected CO2 displaces but also mixes with the in-situ CH4. Restarting production from the well then allows CH4 gas to be produced in the gas mixture. Diffusion allows the CO2 to travel farther into the matrix while keeping CH4 accessible to the well. Surface substitution further reduces the CO2 content and increases the CH4 content in the gas mixture that is produced to the well. A result of the isotherm and its application of Marcellus experimental data is that adsorption of CO2 with resulting desorption of CH4 will lead to a reduction in total pressure if the CO2 content in the gas composition is increased. That is in itself an important drive mechanism because the pressure gradient driving fluid flow is maintained (pressure buildup is avoided). This is because CO2 takes approximately 24 times less space per mole than CH4.

Enhancing Shale Gas Recovery by Carbon Dioxide Injection: A Method of Carbon Capture, Utilization and Storage (CCUS)

Recovery of Adsorbed and Free Oil in Shale Formations by CO2 Injection: an Experimental Study Using 1D- and 2D-NMR

Study of CO2 Enhancing Shale Gas Recovery Based on Competitive Adsorption Theory

Giant Effect of CO2 Injection on Multiphase Fluid Adsorption and Shale Gas Production: Evidence from Molecular Dynamics

Molecular Insights into the Enhanced Shale Gas Recovery by Carbon Dioxide in Kerogen Slit Nanopores

Progress and Prospects of Supercritical CO 2 Application in the Exploitation of Shale Gas Reservoirs

Investigation of CO2–CH4 Displacement and Transport in Shale for Enhanced Shale Gas Recovery and CO2 Sequestration

EXPERIMENTAL STUDY ON CO2 REPLACEMENT METHOD USED IN SHALE GAS EXPLORATION

Shale gas reservoir treatment by a CO 2 -based technology

Effects of gas components, reservoir property and pore structure of shale gas reservoir on the competitive adsorption behavior of CO2 and CH4

Evaluation of Multicomponent Adsorption Kinetics for Carbon Dioxide Enhanced Gas Recovery from Tight Shales

CO2 Sequestration in Shale with Enhanced Gas Recovery

Molecular Insights into Recovery of Shale Gas by Injecting CO2-rich Industrial Waste Gas in Kerogen Slit Nanopores

Influence of CO2 on the Adsorption of CH4 on Shale Using Low-Field Nuclear Magnetic Resonance Technique

Molecular Investigation on the Displacement Characteristics of CH4 by CO2, N2 and Their Mixture in a Composite Shale Model

Investigating the Influence of Pore Shape on Shale Gas Recovery with CO2 Injection Using Molecular Simulation

Enhanced Shale Gas Recovery: Gas Sorption Controls on Recoverable Gas and CO2 Storage Capacity

Molecular Simulation of Diffusion and Competitive Sorption of CH4 and CO2 in Shale Nanopores

Assessing the feasibility and CO2 storage capacity of CO2 enhanced shale gas recovery using Triple-Porosity reservoir model

Research on Mechanism and Effect of Enhancing Gas Recovery by CO2 Huff-n-Puff in Shale Gas Reservoir

Enhanced Shale Gas Recovery By The Injections Of Co2, N-2, And Co2/N-2 Mixture Gases