Abstract:300M steel has been widely utilized in the manufacturing processes of functional parts served in harsh environments. The properties of the parts' surface layer induced by the grinding process are of great importance for the service performance, which can be determined by the input parameters of processing. This paper carried out evaluation of surface modification of 300M steel material under the scCO2-assisted grinding process. To further enhance the understanding of this processing design, the generation of surface modification with dry and flood techniques were also compared. The surface morphology, surface roughness, microstructure evolution, work hardening and surface residual stresses were recorded. The mechanism of grain refinement and the substructure of the martensite lath has been revealed. It was found that the scCO2-assisted grinding processes are responsible for smoother surface profile compared to the dry and flood techniques. Meanwhile, the machined surface roughness was maintained at a stable lower level as the grinding depth increases, proving the great superiority of scCO2 medium for improving the productivity and process sustainability. The grains in the superficial layer have been noticeably refined after grinding operation while it presents deeper refinement with scCO2-assisted grinding process. Meanwhile, nanocrystalline and carbide precipitation were clearly found on the refined layer with scCO2 medium, the crystal defects are mainly the combination of dislocation tangles (DTs), dislocation walls (DWs) and dislocation cells (DCs), and the stacking fault was observed to be the substructure for the lath martensite except the dislocation with TEM analysis. The designed scCO2-assisted grinding contributes to higher work hardening and compressive stresses compared to dry and flood methods.

The Effect of Surface Grinding and Si Addition on the Corrosion of Fe-12Cr ODS Steels in Supercritical CO2

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Understanding the excellent corrosion resistance of Fe-12Cr ODS alloys with and without Si in supercritical CO 2 through advanced characterization

Study on Corrosion Characteristics of Heat-resistant Materials in Supercritical Carbon Dioxide Environment Containing Oxygen Impurities

Effect of surface finishing on the oxidation characteristics of a Fe-21Cr-32Ni alloy in supercritical carbon dioxide

Corrosion behavior of a new alumina-forming duplex stainless steel with different surface treatment in supercritical carbon dioxide

Surface modification of ultrahigh strength 300M steel under supercritical carbon dioxide (scCO2)-assisted grinding process

Atomic insights into the corrosion behavior of Fe-Cr alloys in supercritical CO 2 environment.

On the role of mechanical deformation in the environmental degradation of 310S stainless steels in supercritical carbon dioxide

CORROSION BEHAVIOR OF SUPER-AUSTENITIC STAINLESS STEEL AL-6XN IN SUPERCRITICAL WATER

Corrosion Behavior of Si Diffusion Coating on an Austenitic Fe-Base Alloy in High Temperature Supercritical-Carbon Dioxide and Steam Environment

Interfacial microstructure and corrosion behavior of ODS FeCrAl alloy in oxygen-saturated lead-bismuth eutectic at 450 °C

Role of Al addition and Y 2 O 3 on the intergranular corrosion behavior of AFA-ODS steel in the supercritical water

A Study of the Mechanism of Formation of Composite Oxide Scale on Heat-Resistant Steel 25Cr18Ni9Si2

Effects of Corrosion in Supercritical CO2 on the Microstructural Evolution in 800H Alloy

Corrosion Performance of Austenitic Super 304H in Supercritical CO 2 at Different Temperatures and O 2 Impurity

Thermal effect on oxidation layer evolution and phase transformation in grinding of Fe-Ni super alloy

Impact of SO2 Concentration on the Corrosion Rate of X70 Steel and Iron in Water-Saturated Supercritical CO2 Mixed with SO2

Corrosion behaviors of steels under supercritical CO2 conditions

Carbon depositions within the oxide scale and its effect on the oxidation behavior of low alloy steel in low (0.1 MPa), sub-(5 MPa) and supercritical (10 MPa) CO2 at 550°C

Characterization of Surface Oxidation and Numerical Simulation of Oxidation Kinetics for Fe-3%Si Steel During Decarburization