Abstract:The selective catalytic reduction (SCR) technique that converts NOx from the outlet of industrial boilers at low temperature (<200 °C) requires catalysts that possess both the oxidization property of NOx and the adsorption ability to NH3. However, owing to unsuitable redox capacity, most NH3-SCR catalysts such as MnO2/TiO2 and MnO2–CeO2/TiO2 suffer from poor activity and N2 selectivity and SO2 poisoning. Benefiting from constructing mesoporous MnCeSmTiOx amorphous mixed oxides by the coprecipitation method, enhanced SO2-tolerant low-temperature NH3-SCR performance was achieved. The MnCeSmTiOx catalysts have an amorphous and mesoporous structure with a BET surface area of 214 m2·g–1. The NO conversion could reach nearly 100% at 140–320 °C and maintain >90% at 400 °C and a gas hourly space velocity of 80,000 h–1. The selectivity of N2 could be maintained at ≈100% at 100–320 °C and stay at >90% up to 400 °C. Besides, the MnCeSmTiOx catalyst preserves higher catalytic performance after introducing H2O and SO2 compared with the catalysts without adding Sm. The redox properties, acidic properties, and reaction intermediates of catalysts were analyzed by X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction, ammonia temperature-programmed desorption (NH3-TPD), O2-TPD, pyridine-IR, thermogravimetry–differential scanning calorimetry, and diffuse reflectance infrared Fourier transform. The synergistic effect of the Lewis acid sites and oxidation catalytic sites of mixed oxides serves for the conversion of NO to N2 by following the Langmuir–Hinshelwood mechanism. Doping Sm into MnCeSmTiOx can increase oxygen vacancies and transfer electrons to Mn4+ and Ce4+, which facilities the formation of active adsorbed NO2, bidentate nitrate, and bridging nitrate intermediates and suppresses SO2 poisoning by inhibiting the oxidation of SO2 by Mn4+ and Ce4+. Our work could be beneficial to modulate the redox capacity of active sites on NH3-SCR catalysts so that NOx can be eliminated in complex flue gas at low temperatures.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c02567?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c02567</a>.Experimental details, kinetic experiments and the calculation process of the reaction rate, reaction order, and TOF; XRD patterns; TEM images; and in situ DRIFTS spectra with adsorption of NH3 NO + O2 on MnSmTiOx and CeSmTiOx catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c02567/suppl_file/cs0c02567_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Depth Investigation of the Regulation Mechanism of SiO2 on the Denitrification Performance and Sulfur Resistance of MnCe/Ti SCR Catalyst

Depth investigation of the regulation mechanism of SiO 2 on the denitrification performance and sulfur resistance of MnCe/Ti SCR catalyst

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Effects of SiO2 Addition on SCR Performance of TiO2 Supported Manganese-Cerium Catalysts

Promoting Effect of Si on MnOx Catalysts for Low-Temperature NH3-SCR of NO: Enhanced N2 Selectivity and SO2 Resistance

Mechanistic and Performance Insights into Low-Temperature NH3-SCR Based on Ce-modified Mn-Ti Catalysts

Promoting mechanism of SO2 resistance performance by anatase TiO2 {0 0 1} facets on Mn-Ce/TiO2 catalysts during NH3-SCR reaction

Significant Effects of Adding Mode on Low-Temperature De-NOx Performance and SO2 Resistance of a MnCeTiOx Catalyst Prepared by the Co-Precipitation Method

Promoting mechanism of SO2 resistance performance by anatase TiO2 {001} facets on Mn-Ce/TiO2 catalysts during NH3-SCR reaction

Sulfur/water resistance and regeneration of MnO -CeO2/TiO2 catalyst for low-temperature selective catalytic reduction of NO

Study on NH3-SCR performance and mechanism of Mn supported SO42−-CeCO3F-CePO4 catalysts

Identifying the Promotional Mechanism for the Activity and SO2 Resistance of Ce-doped K-OMS-2 for the Low-Temperature SCR of NO with NH3

Highly efficient MnCe/Ti catalyst for NH 3 -SCR of NO from sintering flue gas at low temperature: CO tolerance and reaction mechanism assessed by in situ DRIFTS

Insight into the Origin of Excellent SO 2 Tolerance and de-NO x Performance of quasi-Mn-BTC in the Low-Temperature Catalytic Reduction of Nitrogen Oxide

Investigation of long-term anti-sulfur and deactivation mechanism of monolithic Mn-Fe-Ce/Al 2 O 3 catalysts for NH 3 -SCR: Changes in physicochemical and adsorption properties

Unusual positive effect of SO2 on Mn-Ce mixed-oxide catalyst for the SCR reaction of NOx with NH3

Research on SCR Denitrification of MnO_x/Al_2O_3 Modified by CeO_2 and Its Mechanism at Low Temperature

Highly Efficient MnCe/Ti Catalyst for NH3-SCR of NO from Sintering Flue Gas at Low Temperature: CO Tolerance and Reaction Mechanism Assessed by in Situ DRIFTS

The Role of the Cu Dopant on a Mn3O4 Spinel SCR Catalyst: Improvement of Low-Temperature Activity and Sulfur Resistance

Improved Activity and SO 2 Resistance by Sm-Modulated Redox of MnCeSmTiO x Mesoporous Amorphous Oxides for Low-Temperature NH 3 -SCR of NO

Improvement of sulfur and water resistance with Fe-modified S-MnCoCe/Ti/Si catalyst for low-temperature selective catalytic reduction of NO with NH3