Abstract:The aqueous zinc-ion batteries (ZIBs) have been considered as a promising energy storage device. However, the ion transfer at the Zn metal anode–electrolyte interface is limited by the sluggish kinetics resulting in high interface resistance. Herein, mesoporous TiO2 (m-TiO2) is coated on the Zn foil (Zn-TiO2) driving the ion's faster transfer to reduce interface resistance (70.1 Ω vs 799.3 Ω of bare Zn). The lower interface resistance is ascribed to shortening the ion transfer path provided by the mesoporous structure and the smaller Zn2+ absorption energy barrier of the surface of the Zn-TiO2 anode as well as the unobstructed ion transfer path at the crystal planes (100) of TiO2, which have been supported by the density functional theory (DFT) calculation and experiments. Therefore, the Zn-TiO2 anodes in the symmetrical cells display a low voltage hysteresis (36.5 mV) and long-term cycling stability (500 h at 4.4 mA cm–2). Especially, the Zn-TiO2/MnO2 full cells show superior cycling performance with a high capacity of 269.8 mAh g–1 after 50 cycles at 0.2 A g–1 and 210.9 mAh g–1 after 1000 cycles at 0.5 A g–1. The analysis of ion-transfer kinetics at the interface provides deep enlightenment and reference for the study of the metal anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18433?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18433</a>.The SEM image of the Zn-20TiO2 surface; cross-section SEM images and galvanostatic cycling curves; galvanostatic cycling performance of symmetric cells; partial enlarged galvanostatic cycling curves of symmetrical cells; the SEM images and surface pictures; nucleation overpotential; the contact angle; calculation models of Zn absorbed on the surfaces; the XPS spectrum; the XRD results; the TEM results; nitrogen adsorption/desorption isotherms; the XRD patterns of MnO2; the discharge/charge curves; the long cycling performance at 1 A g–1; the SEM image of TiO2 after cycling; the TEM image of m-TiO2 after cycling; the cycling performance using a 2 M ZnSO4 electrolyte; the images of the separator; the linear relationships between Zre and ω–0.5; GITT and diffusion coefficient curves of full cells; cyclic voltammetry curves; SEM images of the electrode after cycling; comparison of cycling performance in the symmetrical cell; and comparison of charge transfer impedance in the symmetrical cell (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18433/suppl_file/am0c18433_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Football-like ZnO@TiC As the Active Material of Zinc Anode with Excellent Structural Stability and Long Cycling Performance

Structural Design and Interfacial Characteristics Endow NaTi2(PO4)3 Coated Zinc Anode with High Capacity and Better Cycling Stability

Lattice Expanded Titania As an Excellent Anode for an Aqueous Zinc-Ion Battery Enabled by a Highly Reversible H+-Promoted Zn2+ Intercalation

Dendrite-Free and Highly Stable Zn Metal Anode with BaTiO3/P(VDF-TrFE) Coating

Dispersed Zn Nucleation and Growth Induced by Functional Nano-TiO2 Particles for a Stable Zn Metal Anode

Ultrathin surface coating of conductive and zincophilic titanium oxynitride enables stable zinc anodes for aqueous zinc-ion batteries

Zn anode surface engineering for stable zinc-ion batteries: Carbon dots incorporated mesoporous TiO2 as a coating layer

A facile coating strategy for high stability aqueous zinc ion batteries: Porous rutile nano-TiO<sub>2</sub> coating on zinc anode

Ti4O7 regulating both Zn(OH)42– and electrons for improving Zn–Ni batteries

Synthesis of MnO2@TiO2 composite electrodes via hydrolysis and calcination for high stability zinc-ion batteries

High-surface-area titanium nitride nanosheets as zinc anode coating for dendrite-free rechargeable aqueous batteries

Scalable and Controllable Synthesis of Interface-Engineered Nanoporous Host for Dendrite-Free and High Rate Zinc Metal Batteries

Spraying amorphous carbon coated zinc as powder-based anodes for long-life zinc-ion batteries

Zinc-tin Binary Alloy Interphase for Zinc Metal Batteries

Self-assembled ZnO-carbon Dots Anode Materials for High Performance Nickel-Zinc Alkaline Batteries

A New TiO2‐Based Cathode Material with Interface‐Dominated Storage Mechanism for Aqueous Zinc‐Ion Batteries

Effective Solution Toward the Issues of Zn-Based Anodes for Advanced Alkaline Ni-Zn Batteries

3D Co‐Doping α‐Ni(OH)2 Nanosheets for Ultrastable, High‐Rate Ni‐Zn Battery

Driving the Interfacial Ion-Transfer Kinetics by Mesoporous TiO 2 Spheres for High-Performance Aqueous Zn-Ion Batteries

Modification of Zinc Anodes by In Situ ZnO Coating for High-Performance Aqueous Zinc-Ion Batteries

Polyoxotungstate Featuring Zinc‐Ion‐Triggered Structural Transformation as An Efficient Electrolyte Additive for Aqueous Zinc‐Ion Batteries