Abstract:Brazilian disc (BD) testing is a typical method for measuring the indirect tensile strength of rock materials. Both experimental and theoretical studies involving BD testing of anisotropic rocks typically focus on the influence of the 2D bedding effect, where a specimen is parallel to the bedding planes, whereas the influence of the 3D bedding effect combining both the orientation and loading angle has rarely been investigated. Therefore, in this study, BD tests considering the 3D bedding effect were conducted on layered Longmaxi shale, and 3D BD models of layered shale were established using 3D globally embedded cohesive elements with zero thickness. The numerical results were compared to testing results. The 3D BD numerical model was then applied to simulate Asan gneiss and Silurian silty slate to verify the applicability. Finally, the influence of the 3D bedding effect on both the apparent tensile strength (ATS) and failure modes was analyzed. We also considered the influence of the spacing of bedding planes and bedding strength. The results indicated that the numerical results for both the ATS and failure modes were in good agreement with the test results with a maximum error of 17.8% for the ATS. The applicability of the developed 3D BD numerical model to different layered rocks was confirmed by the numerical results for both Asan gneiss and Silurian silty slate. Strong dependencies of the ATS and failure modes on both the orientation (& alpha;) and loading (& beta;) angles were observed in the layered Longmaxi shale. The normalized ATS for various orientation and loading angles achieved high values of 3.15 and 2.90, respectively, indicating that the influence of the orientation angle is slightly stronger than that of the loading angle. The Longmaxi shale exhibited a distinct tensile failure mode at & alpha; = 0 degrees @ & beta; = 0-15 degrees, & alpha; = 0 degrees @ & beta; = 75-90 degrees, and & alpha; = 90 degrees, but a more complicated mixed mode of both tensile and shear failure was observed under other conditions. The contribution of shear failure increased significantly at 0 degrees < & alpha; < 90 degrees compared to & alpha; = 0 degrees. The spacing of the bedding planes had a limited influence on the ATS and failure modes, but the bedding strength had a significant influence. There may be a linear relationship between bedding strength and the spatial distribution parameter of the critical plane approach criterion.

Numerical Study on the Damage Characteristics of Layered Shale Using 3D DEM

Numerical simulations on compression behaviors of the laminated shale based on the digital image technology and the discrete element method

Anisotropic mechanical response of layered shales: Insights from numerical simulations

Investigation of the anisotropic mechanical response of layered shales

Study on the Damage and Failure Process of Prefabricated Hole-Fracture Combination Defects in Shale

Experimental Investigation on the 3D Anisotropic Fracture Behavior of Layered Shales Under Mode-I Loading

Experiment Study on Damage Properties and Acoustic Emission Characteristics of Layered Shale under Uniaxial Compression

Study of Impact Dynamic Characteristics and Damage Morphology of Layered Rock Mass

Numerical and Experimental Investigation of the Anisotropic Tensile Behavior of Layered Rocks in 3D Space under Brazilian Test Conditions

A Study of Hydraulic Fracture Propagation in Laminated Shale Using Extended Finite Element Method

Experimental and Numerical Study of the Effects of Layer Orientation on the Mechanical Behavior of Shale

Failure Behaviour Simulation of Shale Layer Under Brazilian Test with Particle Flow Code

Experimental and damage model study of layered shale under different moisture contents

Effect of Microstructure Heterogeneity on Shale Strength: Insights from Micro-CT Imaging and Numerical Simulations

Experimental and Numerical Investigation of the Effect of Bedding Layer Orientation on Fracture Toughness of Shale Rocks

Mutual Interference of Layer Plane and Natural Fracture in the Failure Behavior of Shale and the Mechanism Investigation

Dynamic constitutive theory of shale and numerical solution

Numerical Modeling Of Fracture Spacing In Layered Materials

Anisotropic modeling of layered rocks incorporating planes of weakness and volumetric stress

Experimental investigation on the anisotropy of mode-I fracture and tensile failure of layered shale

Uniaxial Compression Test and Numerical Study on the Mechanical Mechanism of Crack Exhibition and Propagation in Layered Rocks