Abstract:Opening-mode fractures developed from a free surface in a layered material often terminate at the interface that divides the fractured layer and the underlying layer. They also display regular spacing that is of the same order of magnitude as the thickness of the fractured layer. We have investigated the stress distribution between two adjacent edge fractures as a function of the ratio of fracture spacing to thickness of the fractured layer using a two-layer elastic model with a fractured top layer. The results show that when the ratio of fracture spacing to the layer thickness changes from greater than to less than a critical value the normal stress acting perpendicular to the fractures near the free surface changes from tensile to compressive. This stress state transition precludes further infilling of fractures unless they are driven by mechanisms other than a pure extension, or there are flaws that significantly perturb the local stress field between the fractures. Hence, the critical fracture spacing to layer thickness ratio defines a lower limit for fractures driven by extension, which also defines the condition of fracture saturation. The critical value of the fracture spacing to layer thickness ratio is independent of the average strain of the fractured layer, and it increases with increasing ratio of Young's modulus of the fractured layer to that of the underlying layer. The critical value increases with increasing Poisson's ratio of the fractured layer, but it decreases with increasing Poisson's ratio of the underlying layer. For the case with the same elastic constants for the fractured layer and the underlying layer, the critical spacing to layer thickness ratio is about 3.1. Delamination between the fractured layer and the underlying layer makes the critical spacing to layer thickness ratio much greater. Infilling fractures grow more easily from flaws located near the bottom of the fractured layer than from those located near the free surface when the spacing to layer thickness ratio is less than the critical value. The propagation of an edge flaw between adjacent edge fractures is unstable, but for the flaw to propagate to the interface, its height has to be greater than a critical size, that decreases with increasing fracture spacing to layer thickness ratio. The propagation behavior of an internal flaw with its lower tip at the interface depends on the edge fracture spacing to layer thickness ratio. The propagation is unstable, when the fracture spacing to layer thickness ratio is greater than a critical value; stable, when the fracture spacing to layer thickness ratio is less than another critical value; and first unstable, then stable, and/or unstable again, when the fracture spacing to layer thickness ratio is between these two critical values.

Numerical Modeling Of Fracture Spacing In Layered Materials

A Numerical Investigation of Fracture Infilling and Spacing in Layered Rocks Subjected to Hydro-Mechanical Loading

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Experimental Study and Numerical Simulation on Rock-Like Materials Containing Weak Layers and Holes

Numerical Simulation of 3D Hydraulic Fracturing Based on an Improved Flow-Stress-Damage Model and a Parallel FEM Technique

Three-dimensional numerical simulation of factors affecting surface cracking in double-layer rock mass

3-D numerical simulation of fracture processes in heterogeneous brittle materials

A pseudo-3D model for hydraulic fracture growth in a layered rock

Numerical Study of Mechanical Properties and Microcrack Evolution of Double-Layer Composite Rock Specimens with Fissures under Uniaxial Compression

Study on Fracture Characteristics of Layered Sandstone under Asymmetric Loading

Numerical Modeling of Pore Pressure Influence on Fracture Evolution in Brittle Heterogeneous Rocks

Fracture propagation and coalescence at bedding plane in layered rocks

Numerical simulation on the dynamic mechanical response and fracture mechanism of rocks containing a single hole

Numerical Simulation of Hydraulic Fracture Propagation on Multilayered Formation Using Limited Entry Fracturing Technique

Modeling of scale-dependent perforation geometrical fracture growth in naturally layered media

Ⅰ/Ⅱ TENSILE-SHEAR MIXED MODE FRACTURE SIMULATION BY 3D DISCRETE ELEMENT METHOD

FINE STRUCTURE DESCRIPTION FOR FRACTURED ROCK MASS A NUMERICAL TESTS ON ITS ENGINEERING PROPERTIES

A Two-Dimensional Planar Fracture Network Model for Broken Rock Mass Based on Packer Test and Fractal Dimension

Non-dimensionalization and scaling of fracture processes in concrete and rock

Numerical simulation to determine the fracture aperture in a typical basin of China

Explanation for Fracture Spacing in Layered Materials