Abstract:A proof-of-concept gas sensor based on a miniaturized and integrated fiber-optic photoacoustic detection module was introduced and demonstrated for the purpose of developing a custom tuning-fork (TF)-enhanced photoacoustic gas sensor. Instead of piezoelectric quartz tuning fork (QTF) in conventional quartz-enhanced photoacoustic spectroscopy (QEPAS), a low-cost custom aluminum alloy TF fabricated by mechanical processing was employed as a photoacoustic transducer and the vibration of TF was measured by fiber-optic Fabry-Pérot (FP) interferometer (FPI). The mechanical processing-based TF design scheme greatly increases the flexibility of the TF design with respect to the complex and expensive manufacture process of custom QTFs, and thus it can be better exploited to detect gases with slow vibrational-translational (V-T) relaxation rates and combine with light sources with poor beam quality. The resonance frequency and the quality factor of the designed custom TF at atmospheric pressure were experimentally determined to be 7.3 kHz and 4733, respectively. Dual-prong differential measurement method was proposed to double the photoacoustic signal and suppress the external same-direction noise. After detailed optimizing and investigating for the operating parameters by measuring H2O, the feasibility of the developed sensor for gas detection was demonstrated with a H2O minimum detection limit (MDL) of 1.2 ppm, corresponding to a normalized noise equivalent absorption (NNEA) coefficient of 3.8 × 10-8 cm-1 W/Hz1/2, which are better than the QTF-based photoacoustic sensors. The proposed gas sensing approach combined the advantages of QEPAS and fiber-optic sensing, which can greatly expand the application domains of PAS-based gas sensors.

Design of flexible hollow core fiber based photoacoustic gas sensor with high cell constant and compact size

Flexible Hollow Core Fiber Photoacoustic Gas Sensor Based on Embedded Acoustic Resonant Structure

Low-frequency Resonant Photoacoustic Gas Sensor by Employing Hollow Core Fiber-Based O-Shaped Multipass Cells

Highly Sensitive Photoacoustic Gas Sensor with Micro-Embedded Acoustic Resonator for Gas Leakage Detection.

Mid-Infrared Hollow-Core Fiber Based Flexible Longitudinal Photoacoustic Resonator for Photoacoustic Spectroscopy Gas Sensing

Compact optical fiber photoacoustic gas sensor with integrated multi-pass cell

Ppb-level CO2 Detection with Miniaturized Gas Absorption Cell Based on Low-Loss Flexible Infrared Hollow Waveguide

Miniaturized and highly-sensitive fiber-optic photoacoustic gas sensor based on an integrated tuning fork by mechanical processing with dual-prong differential measurement

Fiber-Optic Photoacoustic Gas Microsensor Dual Enhanced by Helmholtz Resonator and Interferometric Cantilever

Miniaturized anti-interference cantilever-enhanced fiber-optic photoacoustic methane sensor

Realization of low confinement loss acetylene gas sensor by using hollow-core photonic bandgap fiber

High sensitivity miniaturized multi-pass absorption enhanced differential Helmholtz photoacoustic gas sensor

Small In-Fiber Fabry-Perot Low-Frequency Acoustic Pressure Sensor with PDMS Diaphragm Embedded in Hollow-Core Fiber

Ultra-high sensitive multi-pass absorption enhanced fiber-optic photoacoustic gas analyzer

Parylene-C diaphragm-based low-frequency photoacoustic sensor for space-limited trace gas detection

Integrated near-infrared fiber-optic photoacoustic sensing demodulator for ultra-high sensitivity gas detection

Fiber-Optic Photoacoustic Gas Sensor with Multiplexed Fabry-Pérot Interferometric Cantilevers

Portable ppb-level carbon dioxide sensor based on flexible hollow waveguide cell and mid-infrared spectroscopy

Trace Acetylene Gas Detection Based on a Miniaturized Y-Sphere Coupled Photoacoustic Sensor

A resonant photoacoustic cell for hydrogen gas detection

Double Resonant Cavity Enhanced Photoacoustic Gas Sensor for Acetylene Detection