Abstract:This article proposes a novel highly sensitive humidity sensor with temperature compensation, mainly consisting of a special modal interferometer bonded with thick polyimide (PI) solid films. The modal interferometer is constructed by splicing a special dual-mode fiber (DMF) with two sections of regular single mode fiber (SMF), forming an SDS (SMF-DMF-SMF) structure. Due to the particular design of the refractive index of the DMF, only ${\text {LP}}_{{01}}$ and ${\text {LP}}_{{02}}$ modes are transmitted, which causes a unique wavelength (UWL) to appear in the spectrum. The UWL breaks the periodicity of the conventional interferometric spectrum. More importantly, both sides of UWL respond differently to various measurands, which enables the interferometer to measure dual parameters simultaneously. To achieve a higher humidity sensitivity, the thick PI solid films are used for the first time to manufacture the interferometric humidity sensors. Their thickness is at least one order of magnitude greater than that of the PI coating used in the traditional humidity sensors, which enhances the sensor’s response to humidity variation significantly. The performance of the proposed sensor is further improved with the aid of the varied period Vernier effect by paralleling a bare dual modal interferometer based on the SDS structure as a reference. Similar to the sensing modal interferometric spectrum, the output spectrum of the varied period Vernier effect scheme owns the UWL as well, which makes it easy to distinguish the wavelength shifts of the specific peaks to the measurands. The validity of the proposed scheme is verified by an experimental case, where the humidity sensitivity and the temperature sensitivity are achieved as 1044.26 pm/%RH and 1467.99 pm/°C, respectively.

Dew point measurement using MEMS piezoelectric cantilever and TCF compensation method

An Accurate Dew Point Sensor Based on MEMS Piezoelectric Resonator and Piecewise Fitting Method

Fabrication and Characterization of Sio2 Microcantilever for High Sensitive Moisture Sensor

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

Micromachined SiO 2 microcantilever for high sensitive moisture sensor

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

Temperature Compensation In Fluid Density Measurement Using Micro-Electromechanical Resonant Sensor

Relative Humidity Measurement Technology Based on Microcantilever Resonance

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Research on Water Vapor Release and Adsorption Mechanism to Improve the Measurement of Dew Point Humidity Sensor

Dew Point Measurement Using a Carbon-Based Capacitive Sensor with Active Temperature Control

Improve the dew point recognition accuracy of QCM dew point sensor via electrode surface hydrophobic treatment

A Quartz Crystal Microbalance dew point sensor without frequency measurement

Highly sensitive humidity measurement with temperature compensation based on a special dual-modal interferometric sensor and varied period Vernier effect

An Improved Difference Temperature Compensation Method for MEMS Resonant Accelerometers

Development of A Cmos-Mems Rf-Aerogel-Based Capacitive Humidity Sensor

Modified Coefficient of Equivalent Mass to Explain Decreased Relative Sensitivity of Piezoelectric Cantilever Humidity Sensor in High Mode

A MEMS Resonant Differential Pressure Sensor With High Accuracy by Integrated Temperature Sensor and Static Pressure Sensor

A new optical fiber dew point humidity sensor based on the virtual instrument

Temperature Compensation for MOEMS Micromirror with Piezoresistive Angle Sensor