Abstract:The phase modulation depth (PMD) in phase-generated-carrier demodulation is determined by the laser frequency modulation amplitude and working distance of a fiber-optic interferometer and must be set at a certain value. Active setting of the amplitude is unsuitable, especially for high-speed modulation, owing to variations in the laser source tuning coefficients. Existing calculation schemes for passive setting cannot work both owing to carrier phase delay (CPD) and the accompanied optical-intensity modulation (AOIM). Herein, a modified phase modulation depth calculation and setting technique is proposed. Double photoelectric detection and signal division are optimized to eliminate AOIM using a fiber delay chain and phase-locked amplifier module. Fast Fourier-transform and look-up table methods are used to calculate phase modulation depth without adding the carrier, which is unaffected by CPD. A fiber-optic Michelson interferometer is constructed to verify the feasibility of the proposed method. The experimental results show that AOIM can be eliminated; moreover, PMD can be calculated and set precisely. The displacement deviation is less than 1.03 nm. The resolution of measurement is considerably lesser than 1 nm and nanoscale accuracy is achieved in displacement measurement.

All-fiber All-Optical Phase Controller Based on F-P Interferometer and Er/Yb Co-Doped Fiber

Tunable Fabry-Perot Interferometer from Ferroelectric Polymer Based on Surface Energy Modification

Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

All-optical modulation of Fano-like resonances in apodized fiber Bragg grating using Er/Yb doped fiber

Simultaneously Achieving a Large Negative Dispersion and a High Birefringence Over Er and Tm Dual Gain Bands in a Square Lattice Photonic Crystal Fiber

A Graphene-Enhanced Fiber-Optic Phase Modulator with Large Linear Dynamic Range

Ultra-sensitive all-optical phase modulation based on a fiber optic interferometer combined with Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene-incorporated PDMS

The All-fiber Graphene Modulator

Ultra-sensitive all-optical phase modulation based on a fiber optic interferometer combined with Ti 3 C 2 T x MXene-incorporated PDMS.

Optoelectronic Oscillator with Phase-Shifted Fiber Bragg Grating

Ultra-sensitive all-optical phase modulation based on a fiber optic interferometer combined with Ti_3C_2T_x MXene-incorporated PDMS

All-Optical Broadband Phase Modulation of A Subcarrier in A Radio over Fiber System

Polymer-Based Electrooptical

All-Optical Modulator with Long Range Surface Plasmon Resonance

Tunable Fiber Fabry‐perot Filter for PM‐IM Conversion and Efficiency Improvement in Radio‐over‐fiber Links

The All-Fiber Electro-Absorption Modulator Based on Quadri-Layer Graphene

Near-resonance Electro-Optic Activity Enhancement and Improved Modulation Performance for Polymer Based Fabry–Pérot Interferometers

All-fiber modulator derived from the large-transverse-offset Mach-Zehnder interferometer coated with ITO

Phase modulation depth setting technique of a phase-generated-carrier under AOIM in fiber-optic interferometer with laser frequency modulation.

Optical Microfiber All-Optical Phase Modulator for Fiber Optic Hydrophone

All-Fiber Wavelength-Switchable Orbital Angular Momentum (OAM) Laser Assisted by Fiber Bragg Grating and Fabry-Perot Interferometer Directly Inscribed in Erbium-Doped Fiber with Femtosecond Laser