Abstract:Membrane drying and water flooding are important problems concerned Proton Exchange Membrane Fuel Cell (PEMFC) system's performance and reliability. In order to monitor the PEMFC stack's drying and flooding, a cell voltage monitor system (CVMS) was attached on PEMFC system, which in return degraded the system's stability and increased the system's complexity. This paper's purpose is to abandon the CVMS and diagnose PEMFC stack's drying with in-situ ohmic resistance test and diagnose PEMFC's flooding with anode pressure drop test. Firstly, the ohmic resistance were tested under variable operating conditions with current interruption method. The PEMFC's membrane drying processes were studied through the experimental method, the change rules of operating voltage, ohmic resistance and anode pressure drop had been obtained. The in-situ ohmic resistance test plan had been discussed to judge if the PEMFC is working under the dryness condition. Secondly, the flooding experiments had been developed on the same PEMFC stack. The experiment result revealed that, the anode pressure drop data maintained good linear relations with the operational parameter in unflooding situations; the anode pressure drop obviously increased when flooding occurred. The operational parameters influenced the PEMFC's flooding: increasing the cathode inlet relative humidity, elevating the operating temperature, enhancing the operating current, reducing the cathode inlet stoichiometric ratio, the PEMFC would flood easily. But the anode inlet stoichiometric ratio and operating pressure did not have the obvious influence to PEMFC's flooding. The PEMFC's flooding problem would be solved effectively by pulse exhaust method. It would improve the PEMFC's performance and increase its efficiency to choose the proper pulse opportunity and pulse width. Through this study, the PEMFC's ohmic resistance test for membrane drying diagnosis and anode pressure drop test for PEMFC flooding diagnosis system had been established, an in-situ diagnosis system for vehicle PEMFC water management system have been raised. The work in this paper basically dealt with the main problems in the PEMFC water management system for vehicular application. It is valuable for optimizing PEMFC system and improving PEMFC's efficiency.

Water management issues during load cycling under high temperature and low humidity conditions relevant for heavy-duty applications of PEMFC

Mechanistic investigation on the voltage collapse of polymer electrolyte membrane fuel cell under high-temperature and low-humidity conditions

Recent advances in heat and water management of forced-convection open-cathode proton exchange membrane fuel cells

Investigating temperature-driven water transport in cathode gas diffusion media of PEMFC with a non-isothermal, two-phase model

Analyzing Key Factors Influencing Water Transport in Open Air-Cooled PEM Fuel Cells

Behavior analysis of PEMFC with geometric configuration variation during multiple-step loading reduction process

Comparison of Self-Humidification Effect on Polymer Electrolyte Membrane Fuel Cell with Anodic and Cathodic Exhaust Gas Recirculation

Effects of Moisture Dehumidification on the Performance and Degradation of a Proton Exchange Membrane Fuel Cell

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Review On Water Management Methods For Proton Exchange Membrane Fuel Cells

Distribution Characteristics and Control Optimization of Anode and Cathode Water in Fuel Cells under Low Humidification

A Scalable and Robust Water Management Strategy for PEMFCs: Operando Electrothermal Mapping and Neutron Imaging Study

Numerical Study of Water Transport and Operating Strategy for Fuel Cells with Segmented Water Management Flow Fields

Advancements and insights in thermal and water management of proton exchange membrane fuel cells: Challenges and prospects

Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell

Dynamic Performance of a High-Temperature PEM Fuel Cell – an Experimental Study

Study on the diagnosis of vehicle PEM Fuel Cell Membrane drying and water flooding

Design and multi-objective optimization of low-temperature proton exchange membrane fuel cells with efficient water recovery and high electrochemical performance

Numerical investigation of parameter distributions in high-temperature PEMFCs under various cooling surface temperature gradients

On-line failure diagnosis and auto-disposal for automotive PEMFC

Experimental Investigation and Comprehensive Analysis of Performance and Membrane Electrode Assembly Parameters for Proton Exchange Membrane Fuel Cell at High Operating Temperature