Abstract:We present results of an extensive set of first-principles density functional theory calculations of point defect formation, binding, and clustering energies in austenitic Fe with dilute concentrations of Cr and Ni solutes. A large number of possible collinear magnetic structures were investigated as appropriate reference states for austenite. We found that the antiferromagnetic single- and double-layer structures with tetragonal relaxation of the unit cell were the most suitable reference states and highlighted the inherent instabilities in the ferromagnetic states. Test calculations for the presence and influence of noncollinear magnetism were performed but proved mostly negative. We calculate the vacancy formation energy to be between 1.8 and 1.95 eV. Vacancy cluster binding was initially weak at 0.1 eV for divacancies but rapidly increased with additional vacancies. Clusters of up to six vacancies were studied and a highly stable octahedral cluster and stacking fault tetrahedron were found with total binding energies of 2.5 and 2.3 eV, respectively. The 〈100〉 dumbbell was found to be the most stable self-interstitial with a formation energy of between 3.2 and 3.6 eV and was found to form strongly bound clusters, consistent with other fcc metals. Pair interaction models were found to be capable of capturing the trends in the defect cluster binding energy data. Solute-solute interactions were found to be weak in general, with a maximal positive binding of 0.1 eV found for Ni-Ni pairs and maximum repulsion found for Cr-Cr pairs of −0.1 eV. Solute cluster binding was found to be consistent with a pair interaction model, with Ni-rich clusters being the most stable. Solute-defect interactions were consistent with Ni and Cr being modestly oversized and undersized solutes, respectively, which is exactly opposite to the experimentally derived size factors for Ni and Cr solutes in type 316 stainless steel and in the pure materials. Ni was found to bind to the vacancy and to the 〈100〉 dumbbell in the tensile site by 0.1 eV and was repelled from mixed and compressive sites. In contrast, Cr showed a preferential binding to interstitials. Calculation of tracer diffusion coefficients found that Ni diffuses significantly more slowly than both Cr and Fe, which is consistent with the standard mechanism used to explain radiation-induced segregation effects in Fe-Cr-Ni austenitic alloys by vacancy-mediated diffusion. Comparison of our results with those for bcc Fe showed strong similarity for pure Fe and no correlation with dilute Ni and Cr.

Diffusivity of Point Defects in the Passive Film on a Ni16Cr13Co4Mo Alloy in Molten NaCl-Na2SO4

Diffusivity of the point defects in the passive film on a Ni16Cr13Co4Mo alloy in molten NaCl-Na 2 SO 4

Diffusivity of a Point Defect in the Passive Film on Ti with Plastic Deformation in 3.5% NaCl Solution

Influence of Potentiostatic Aging, Temperature and Ph on the Diffusivity of a Point Defect in the Passive Film on Nb in an HCl Solution

Electronic Properties of the Passive Films Growth on Cu-Ni Alloy from the Viewpoint of Point Defect Model and Power-Law Model

Influences of temperature, pH value and chloride ion on the diffusivity of point defect in the passive film on X80 pipeline steel

Calculation of Diffusivity of Point Defects in Passive film Formed on X80 Pipeline Steel

Corrosion and passive behavior of Al0.8CrFeNi2.2 eutectic high entropy alloy in different media

The semi-conductor property and corrosion resistance of passive film on electroplated Ni and Cu-Ni alloys

The study of passive film's resistivity distribution to crystalline Fe-based pseudo high entropy alloys: the use of measurement model and Cole-Cole regression

Corrosion Resistance, Composition, and Stratification of Passive Films: Ni-22Cr and Ni-22Cr-6Mo Alloys Passivated and Exposure Aged in Acidic Chloride Solutions

Selective corrosion mechanism of CoCrFeMoNi high-entropy alloy in the transpassive region based on the passive film characterization by ToF-SIMS

Passivity Breakdown on 436 Ferritic Stainless Steel in Solutions Containing Chloride

Cl-induced Passivity Breakdown in Α-Fe2o3(0001),α-cr2o3(0001),and Their Interface:A DFT Study

Corrosion and passive behaviors of the Co-Cr-Fe-Ni-Nb eutectic high-entropy alloys in different electrolyte solutions

Effect of Microalloying with Ti or Cr on the Corrosion Behavior of Al-Ni-Y Amorphous Alloys

Defect and solute properties in dilute Fe-Cr-Ni austenitic alloys from first principles

Effect of ultrasonic cavitation on the diffusivity of a point defect in the passive film on formed Nb in 0.5M HCl solution

Insights into the Passivity and Electrochemistry of CoCrFeMnNi High Entropy Alloy Fabricated by Underwater Laser Direct Metal Deposition

Corrosion and passive behavior of AlxCrFeNi3−x (x = 0.6, 0.8, 1.0) eutectic high entropy alloys in chloride environment

Electrochemical Properties and Growth Mechanism of Passive Films on Alloy 690 in High-Temperature Alkaline Environments