Abstract:Reconfigurable intelligent surfaces (RISs) are envisioned as a potentially transformative technology for future wireless communications. However, RISs' inability to process signals and the attendant increased channel dimension have brought new challenges to RIS-assisted systems, including significantly increased pilot overhead required for channel estimation. To address these problems, several prior contributions that enhance the hardware architecture of RISs or develop algorithms to exploit the channels' mathematical properties have been made, where the required pilot overhead is reduced to be proportional to the number of RIS elements. In this paper, we propose a dimension-independent channel state information (CSI) acquisition approach in which the required pilot overhead is independent of the number of RIS elements. Specifically, in contrast to traditional signal transmission methods, where signals from the base station (BS) and the users are transmitted in different time slots, we propose a novel method in which signals are transmitted from the BS and the user simultaneously during CSI acquisition. With this method, an electromagnetic interference random field (IRF) will be induced on the RIS, and we propose the structure of sensing RIS to capture its features. Moreover, we develop three algorithms for parameter estimation in this system, in which one of the proposed vM-EM algorithm is analyzed with the fixed-point perturbation method to obtain an asymptotic achievable bound. In addition, we also derive the Cramér-Rao lower bound (CRLB) and an asymptotic expression for characterizing the best possible performance of the proposed algorithms. Simulation results verify that our proposed signal transmission method and the corresponding algorithms can achieve dimension-independent CSI acquisition for beamforming.

RIS-Aided Communications at 3.5GHz: Some Insights from Practical Measurement Results

Two-Bit RIS-Aided Communications at 3.5GHz: Some Insights from the Measurement Results Under Multiple Practical Scenes

RIS-Aided Wireless Communications: Prototyping, Adaptive Beamforming, and Indoor/Outdoor Field Trials

Design and Prototyping of Transmissive RIS-Aided Wireless Communication

Prototyping and real-world field trials of RIS-aided wireless communications

Secure Beamforming Design for Reconfigurable Intelligent Surface Assisted Downlink Transmission

Multi-user passive beamforming in RIS-aided communications and experimental validations

Measurement-Based Small-Scale Channel Model for Sub-6 GHz RIS-Assisted Communications

Reconfigurable Intelligent Surface-Based Wireless Communications: Antenna Design, Prototyping, and Experimental Results.

Millimeter Wave Communications With Reconfigurable Intelligent Surfaces: Performance Analysis and Optimization

Quantized Phase Alignment by Discrete Phase Shifts for Reconfigurable Intelligent Surface-Assisted Communication Systems

Multi-Scenario Broadband Channel Measurement and Modeling for Sub-6 GHz RIS-Assisted Wireless Communication Systems

Time-Domain Channel Measurements and Small-Scale Fading Characterization for RIS-Assisted Wireless Communication Systems

RIS-assisted High-Speed Railway Integrated Sensing and Communication System

Characterization of Indoor RIS-Assisted Channels at 304 GHz: Experimental Measurements, Challenges, and Future Directions

Transmissive RIS for 6G Communications: Design, Prototyping, and Experimental Demonstrations

Capacity Characterization for Binary RIS Aided MIMO Communication System Based on An Electromagnetic Scattering Model

Transmissive RIS for B5G Communications: Design, Prototyping, and Experimental Demonstrations

Sensing RISs: Enabling Dimension-Independent CSI Acquisition for Beamforming

Reconfigurable Intelligent Surface-Enabled Integrated Sensing and Communication: a Sensing-Assisted Communication Framework