Characterization of Indoor RIS-Assisted Channels at 304 GHz: Experimental Measurements, Challenges, and Future Directions

George C. Alexandropoulos,Bo Kum Jung,Panagiotis Gavriilidis,Sérgio Matos,Lorenz H. W. Loeser,Varvara Elesina,Antonio Clemente,Raffaele D'Errico,Luís M. Pessoa,Thomas Kürner

2024-12-10

Abstract:Reconfigurable Intelligent Surfaces (RISs) are expected to play a pivotal role in future indoor ultra high data rate wireless communications as well as highly accurate three-dimensional localization and sensing, mainly due to their capability to provide flexible, cost- and power-efficient coverage extension, even under blockage conditions. However, when considering beyond millimeter wave frequencies where there exists GHz-level available bandwidth, realistic models of indoor RIS-parameterized channels verified by field-trial measurements are unavailable. In this article, we first present and characterize three RIS prototypes with $100\times100$ unit cells of half-wavelength inter-cell spacing, which were optimized to offer a specific non-specular reflection with $1$-, $2$-, and $3$-bit phase quantization at $304$ GHz. The designed static RISs were considered in an indoor channel measurement campaign carried out with a $304$ GHz channel sounder. Channel measurements for two setups, one focusing on the transmitter-RIS-receiver path gain and the other on the angular spread of multipath components, are presented and compared with both state-of-the-art theoretical models as well as full-wave simulation results. The article is concluded with a list of challenges and research directions for RIS design and modeling of RIS-parameterized channels at THz frequencies.

Information Theory,Emerging Technologies

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the challenges faced by reconfigurable intelligent surface (RIS) - assisted indoor channel modeling and measurement in the terahertz (THz) frequency band, especially at 304 GHz. Specifically, the paper focuses on the following aspects:

1. **Signal Propagation Problems at High Frequencies**: In the THz frequency band, signal propagation faces extremely high penetration losses, which makes the design of efficient transmitters or large - scale MIMO systems complex and costly.

2. **Limitations of Existing Models**: RIS models in current literature are usually based on idealized assumptions, such as unit - amplitude reflection, no mutual coupling, and continuous phase control. Although these assumptions are helpful for preliminary research, they cannot fully capture the behavior of RIS in real - world scenarios, especially in complex indoor environments.

3. **Lack of Actual Measurement Data**: For the available bandwidth at the GHz level, existing theoretical models and full - wave simulation results have not been verified by field measurements, especially when it comes to channel characteristics involving RIS parameterization.

To solve the above problems, this paper has carried out the following work:

- **Designed and Characterized Three Static RIS Prototypes**: These RISs have 100×100 cells, half - wavelength spacing, and implement 1 - bit, 2 - bit, and 3 - bit phase quantization respectively to provide specific non - specular reflection.

- **Conducted an Indoor Channel Measurement Campaign at 304 GHz**: Through experimental measurements, the performance of RIS under different configurations was verified and compared with the state - of - the - art theoretical models and full - wave simulation results.

- **Analyzed the Measurement Data**: Key parameters such as path gain and angular spread were explored, and directions for future research and challenges were proposed.

Ultimately, the paper aims to provide a more accurate and practical reference for RIS design and channel modeling in the THz frequency band, thereby promoting the development of ultra - high - speed wireless communication and high - precision three - dimensional positioning and sensing technologies.

### Formula Summary

- **Free - Space Path Gain Formula**:
\[
P_{ff}=\frac{\sigma_{\text{RIS}}\lambda^{2}}{(4\pi)^{3}d_{1}^{2}d_{2}^{2}}
\]
where \(\sigma_{\text{RIS}}\) is the radar cross - section (RCS) of RIS, \(\lambda\) is the wavelength, and \(d_{1}\) and \(d_{2}\) are the distances from the transmitter to RIS and from RIS to the receiver, respectively.

- **Near - Field/Far - Field Path Gain Formula**:
\[
P_{nf,ff}=K^{2}(d_{2}, 30^{\circ})P_{ff}
\]
where \(K(d_{2}, 30^{\circ})\) is a function that captures beamforming errors, and the specific definition can be found in reference [9].

Through the comparison of these formulas and experimental data, the paper shows the actual performance of RIS in the THz frequency band and points out the key directions for future research.