Abstract:The application of a robot manipulator to the task of parts assembling or collaboration with human workers requires compliant control and intrinsic safety. As a result, it is necessary to exert accurate torque on each joint of the robot through torque sensing and implementing closed-loop joint torque control. This torque servo system is required to track reference torque signals while operating under the influence of motor friction, flexibility of the harmonic drive, noise from the sensor, robot dynamics modelling error and other unknown certainties, resulting in large control efforts. This paper focuses on providing better compliance control for collaborative robots and proposes a joint torque controller design under development with active disturbance rejection concept. The controller is designed through a novel extended state observer to estimate and compensate for the unmodelled dynamics of the system, nonlinearly variable motor friction, and other uncertainties. Then, a simple proportional differential controller is designed to produce control law. In spite of the remarkable performance in dealing with the mechanical dynamics of the joint actuator, the original controller does not work well with the electrical factor of the joint actuator due to the limited current loop bandwidth in the hardware of motor and driver. To eliminate the detrimental effect of the time delay in current servo, a predictive output method based on a nonlinear tracking differentiator (TD) is used to improve the controller within the framework of active disturbance rejection control. Both simulations and experiments are conducted on a prototype one degree of freedom manipulator with a joint torque sensor. The results demonstrate the enhancement of both the system stability and disturbance rejection performances. Based on the proper treatment of actuator delay, the dominant effect of the motor friction and the flexibility of the harmonic drive has been reduced to insignificance. Moreover, the proposed controller is easy to implement because the explicit dynamic model of the system is not required.

A Collaborative Robot Torque Prediction Method Based on CNN-TCN Model.

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

A Method for Predicting Relative Position Errors in Dual-Robot Systems Via Knowledge Transfer from Geometric and Nongeometric Calibration

A Prediction and Compensation Method of Robot Tracking Error Considering Pose-Dependent Load Decomposition

A Spatio-Temporal Transformer Network for Human Motion Prediction in Human-Robot Collaboration

Joint torques prediction of a robotic arm using neural networks

A Convolution Neural Network Based Semi-Parametric Dynamic Model for Industrial Robot

Joint torque estimation method of industrial robot by combining error compensation model based on LSTM and iterative weighted parameter identification

Prediction of Human Voluntary Torques Based on Collaborative Neuromusculoskeletal Modeling and Adaptive Learning

Optimization of Torque-Control Model for Quasi-Direct-Drive Knee Exoskeleton Robots Based on Regression Forecasting

Joint torque prediction of industrial robots based on PSO-LSTM deep learning

LSTM-based External Torque Prediction for 6-DOF Robot Collision Detection

Cooperative Predictive Position Control of Dual-Motor System

Lower Limb Joint Torque Prediction Using Long Short-Term Memory Network and Gaussian Process Regression

Lower Limb Torque Prediction for Sit-To-Walk Strategies Using Long Short-Term Memory Neural Networks

Deep Learning Aided Dynamic Parameter Identification of 6-DOF Robot Manipulators

Joint Torque Control of a Collaborative Robot Based on Active Disturbance Rejection with the Consideration of Actuator Delay

Ankle Joint Torque Prediction Using an NMS Solver Informed-ANN Model and Transfer Learning

A Model-Data Compound Driven Method for Compensating Robot Tracking Error

Lower Limb Joint Angle Prediction Based on Multistream Signaling and Quantile Regression, Temporal Convolution Network–Bidirectional Long Short-term Memory Network Neural Network

Joint torque estimation for the human arm from sEMG using backpropagation neural networks and autoencoders