Wideband Back Cover Microstrip Antenna with Multiple Shorting Vias for Mobile 5G MIMO Applications

Mingzhe Hu,Yue Li

DOI: https://doi.org/10.1109/tap.2023.3291802

IF: 5.7

2023-01-01

IEEE Transactions on Antennas and Propagation

Abstract:This communication proposes a wideband and low-profile microstrip antenna for multiple-input multiple-output (MIMO) applications. By loading two sets of shorting vias and cutting two symmetrical slots on a rectangular patch, triple modes, including the monopole mode, the TM10, and TM01 modes, are excited simultaneously to achieve the wideband radiation in a relatively low profile. Four elements of the proposed antenna are placed in a sequentially rotated configuration for mobile MIMO applications with a small volume of $59.2\times 59.2\times2.5$ mm3 ( $0.82\,\,\lambda _{0} \times 0.82\,\,\lambda _{0} \times 0.034\,\,\lambda _{0}$ , where $\lambda _{0}$ is the free-space wavelength at the center frequency). A cross-line fence is placed in the center to improve the isolation between adjacent elements. A prototype of the proposed MIMO antenna is fabricated and tested, with the measured −6-dB impedance bandwidth of 3.3–5.0 GHz, covering the N77/N78/N79 bands of fifth-generation (5G) requirements. The proposed four-elements MIMO antenna has the advantages of low profile, compact size, and wide bandwidth, providing a feasible solution of 5G mobile MIMO antennas on the back cover of the device.