Abstract:Microstrip antennas have become ubiquitous in today's wireless communication world due to their low profile, low cost, and simplicity in fabricating on circuit boards. However, poor performance characteristics, such as limited bandwidth, low power handling capabilities, and low gain, limit their applicability in various instances. Path loss will be substantial in 5th generation (5G) wireless communication due to the utilization of high-frequency bands. A high-gain antenna with a small size is necessary to address this issue. A compact tri-band, slotted monopole antenna with high and consistent gain employing a defected ground plane structure (DGS) has been investigated and implemented in this study. This proposed antenna uses three inverted L-shaped stubs connected to the radiating element to cover the desired bands while keeping the antenna size small. The designed antenna has two key characteristics: (i) wide bandwidth and (ii) reasonable gain. The antenna covers 2.45 and 5.6 GHz WLAN, 2.4 GHz Wi-Fi, 2.5 and 5.2 GHz WiMAX and 3.7 GHz Sub-6 GHz of 5G for mobile communication. The overall substrate size of the antenna is 30 ? 17 ? 1.6 mm3and the electrical dimensions are 0.49 ?L ? 0.28 ?L ? 0.026 ?L, where ?L is the free space wavelength at 2.45 GHz. The measured reflection coefficient (S11 < -10dB) covers 2.4 - 2.52 GHz (bandwidth 112 MHz) and 3.4 - 4.1 GHz (bandwidth 700 MHz) and 5.2 - 6.6 GHz (bandwidth 1359 MHz) with a fractional bandwidth of 5.1 % at lower frequency band, 18.6 % at mid frequency band and 23.7 % at high frequency band. A prototype antenna has also been developed using an inexpensive, low-profile 1.6 mm thick FR-4 (?r = 4.4) substrate. The measured peak gains achieved are 1.35 dB at 2.45 GHz, 2.55 dB at 2.65 GHz and 3.8 dB at 5.5 GHz. The simulated results have been validated against actual experimental measurements, and the outcomes are consistent and match with certainty. The proposed antenna design is very compact and easy to fabricate due to the absence of vias.

Four-port low-profile broadband antenna with fan-leaf slits and shorting pins for 5G mobile applications

Low-Profile Wideband Four-Corner-Fed Square Patch Antenna for 5G MIMO Mobile Antenna Application

Wideband Four-Port Single-Patch Antenna Based on the Quasi-TM 1/2,1/2 Mode for 5G MIMO Access-Point Application

Wideband Back Cover Microstrip Antenna with Multiple Shorting Vias for Mobile 5G MIMO Applications

Dual-band 8-element MIMO antenna with short neutral line for 5G mobile handset

Wideband Shared-Radiator Four-Element MIMO Antenna Module for 5G Mobile Terminals

A Novel Broadband Monopole Antenna with T-Slot, CB-CPW, Parasitic Stripe and Heart-Shaped Slice for 5G Applications

Design of a Compact Base Station Antenna for 5G N78-Band Application

Mobile-integrated SRR-based four-port MIMO antenna for broadband mm-wave 5G applications

A Novel High Isolation 4-Port Compact MIMO Antenna with DGS for 5G Applications

Design of a Broadband Millimeter-Wave Array Antenna for 5G Applications

Compact 8‐Port Low‐Profile Antenna Array for 5G Mobile Phones

A Low-profile Wideband Antenna for 5G Millimeter-Wave Applications

A Wideband Low-Profile Microstrip MIMO Antenna for 5G Mobile Phones

A Low-Cost Dual-Band Multimode High-Gain Stacked-Patch Antenna Based on SISL for 5G Applications

A Compact C-Band Multiple-Input Multiple-Output Circular Microstrip Patch Antenna Array with Octagonal Slotted Ground Plane and Neutralization Line for Improved Port Isolation in 5G Handheld Devices

A Compact Dual-Polarized Patch Antenna With L-Shaped Short Pins

Low-profile Dual-band Microstrip Patch Antenna with Shorting Pins

Triple-band stub loaded patch antenna with high gain for 5G Sub-6 GHz, WLAN and WiMAX applications using DGS

A dual-band wideband high-gain slot loaded microstrip patch antenna

Quad-port 28/38 GHz Antenna with Isolation Improvement for 5G Wireless Networks