Abstract:The control plant model of multiple grid-connected converters is a multivariable coupling model. There is complex coupling interaction between the control loops of the multiple converters, resulting in poor current control quality or interaction oscillation issues when the grid impedance is high or the number of converters is large. This article proposes a novel multivariable decoupling control method based on a summation difference coordinate for eliminating the current control interaction between multiple converters. With a summation difference coordinate transformation matrix, the multivariable model of multiple converters can be transformed to be multiple single-variable models. By designing specific current regulators for the summation current and the difference current loops in the summation difference coordinate, the summation current and each difference current can be regulated independently. Compared with the conventional methods, the proposed method can improve the current control bandwidth and stability without introducing any high-frequency oscillation especially when the grid impedance is high or the number of converters is large. Moreover, based on the proposed approach, the classical single variable control theory is enough to designthe regulator parameters for any number of converters under the new coordinate system. Experimental results of four three-phase 2 kW two-level converters have been presented, which validates the proposed approach.

Current Loop Design for High-Speed Dual Three-Phase Generator Grid-Connected Control System

A Robust Dual-Loop Current Control Method with a Delay-Compensation Control Link for LCL-Type Shunt Active Power Filters

Current Control of LCL-Type Shunt APFs: Damping Characteristics, Stability Analysis, and Robust Design Against Grid Impedance Variation

A robust multi-resonant PR regulator for three-phase grid-connected VSI using direct pole placement design strategy

Accurate Two-Degree-of-freedom Discrete-Time Current Controller Design for PMSM Using Complex Vectors

Dual Synchronous Generator: A New Solution for Grid-Forming

Research on Shaft-Generator PWM Rectifier Based on Novel Voltage-Current Dual-Loop Control

An Accurate Discrete Current Controller for High-Speed PMSMs/Gs in Flywheel Applications

Optimal Tuning of the Current Loop for Dual-Loop Controlled Grid-Forming Converters Based on Active Damping Optimization

Control Integrated Studies on High Speed Permanent Magnetic Generators System

Current Zero-Crossing Duration Reduction of a Semicontrolled Open-Winding PMSG System Based on Third Harmonic Current Injection

Transient Synchronization Stability Modeling and Analysis of Grid-Following Converter Considering Current Dynamics

Comprehensive and Robust Parameter Design of Grid-Forming Converter with Inner Dual-Loop under Weak Grid Condition

Modeling and Triple-Loop Control of ZVS Grid-Connected DC/AC Converters for Three-Phase Balanced Microinverter Application

Improved Dual-Pi Rotor Current Control Scheme for a Wind-Driven DFIG During Asymmetrical Grid Voltage Dips

A Novel Decoupling Control Approach for Improving Dynamic Performance and Stability of Multiple Grid-Connected Converters

Cross-coupling and Decoupling Techniques in the Current Control of Grid-Connected Voltage Source Converter

Technology For Current Loop Decoupling Control Of Pmsm

A Hybrid Multi-loop Current Control of the Grid-Connected Converter with LCL Filter

On Power Control of Grid-Forming Converters: Modeling, Controllability, and Full-State Feedback Design

Overview of Current Loop Control Technology for Permanent Magnet Synchronous Motor Servo System