Abstract:This study presents a novel roller piston pump,in which a cam guide-roller type rolling support is adopted to replace the sliding pair support of the swash plate-slipper pair to achieve the oil suction and discharge of the piston cavity.In addition,the shaft distribution is used to replace the original valve plate distribution and the driving shaft is used as the distribution shaft to remove the valve plate structure,which greatly simplifies the design of the axial piston pump.Such a configuration largely reduces the number of sliding friction pairs of the pump,and avoids the influence of the sliding friction pair on it under high-speed and variable-speed conditions.Firstly,mathematical models of the mechanical and volumetric efficiencies of the roller pump are deduced respectively through force analysis and the compressibility equation.Based on the numerical simulation of MATLAB and AMESim,the effects of load pressure and rotational speed on mechanical and volumetric efficiencies are studied respectively,and it is verified that the roller pump has no structural flow pulsation.The prototype pump is then designed and built,along with a special test rig.The outlet pressure,outlet flow,and torque of the pump under different load pressures and rotational speeds are measured,and the mechanical and volumetric efficiencies of the prototype pump under various load pressures and rotational speeds are obtained.The experimental results are in good agreement with the simulated analysis.When the load pressure is 8 MPa and the speed is 5000 r/min,the mechanical and the volumetric efficiencies are 85.5%and 96.8%,respectively.When the speed is increased to 10000 r/min,the mechanical and the volumetric efficiencies are 66.7%and 95.6%,respectively.The experimental results show that the proposed roller piston pump has excellent efficiency under wide-speed and high-speed conditions and can be a potential solution as a fuel pump in aerospace fuel systems.

Mechanical Efficiency of Cartridge Two-Dimensional (2D) Piston Pump for Electro-Hydrostatic Actuators

Emulation and Research of the Fast Electro-hydraulic Actuator

Analysis of the Cylinder Block Tilting Inertia Moment and Its Effect on the Performance of High-Speed Electro-Hydrostatic Actuator Pumps of Aircraft

Design, Modeling, and Pressure Control of a 300-Kw-class Hydraulic Pump/motor Loading System with Energy Regeneration

Effect of Piston-Slipper Assembly Mass Difference on the Cylinder Block Tilt in a High-Speed Electro-Hydrostatic Actuator Pump of Aircraft

Churning Losses Analysis on the Thermal-Hydraulic Model of a High-Speed Electro-Hydrostatic Actuator Pump

Development of an Intelligent Electric Motor-Driven Pump with High Energy Efficiency

Effects of Splined Shaft Bending Rigidity on Cylinder Tilt Behaviour for High-Speed Electro-Hydrostatic Actuator Pumps

Real-time Measurement on Lubrication Characteristic Parameters of Plane Port Pair in Axial Piston Pumps

Theoretical and Experimental Investigation on the Efficiency of a Novel Roller Piston Pump

Effect of Surface Texture on Wear Reduction of the Tilting Cylinder and the Valve Plate for a High-Speed Electro-Hydrostatic Actuator Pump

Experimental Study of an Insert and Its Influence on Churning Losses in a High-Speed Electro-Hydrostatic Actuator Pump of an Aircraft

Numerical and experimental study on flat roller/cam pair in a two-dimensional piston pump

A review of high-speed electro-hydrostatic actuator pumps in aerospace applications: Challenges and solutions

Experimental Test on Distribution Characteristics of Power Losses of a High-speed Axial Piston Pump for Electro Hydrostatic Actuator

Load-Sensing Pump Design To Reduce Heat Generation Of Electro-Hydrostatic Actuator Systems

Effects of Inclined Cylinder Ports on Gaseous Cavitation of High-Speed Electro-Hydrostatic Actuator Pumps: a Numerical Study

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Analytical Modeling and Experimental Verification of Churning Torque for Cam Guide Rails of 2D Piston Pump

Design strategy and performance evaluation of novel miniature two-dimensional (2D) piston pump with a dual stacking mechanism

Comparative Study on Asymmetric and Symmetric Configurations of Valve Plates in Axial Piston Pumps