Abstract:Hydropower has been the leading renewable source and cheapest ways to generate electrical energy in the world. In recent years, there has been a major upsurge in the hydropower development because of the use of pump as turbine (PAT). However, the operational reliability of a PAT is greatly affected by the unsteady flow fields; therefore, it is important to examine the unsteady flow behavior which can be used as a reference to reduce the noise, vibration, and cavitation performance for centrifugal pumps working as turbines. Thus, the objective of this study was to evaluate the unsteady flow fields by analyzing the distribution of the pressure pulsations using both numerical and experimental measurements in a PAT operating in pump mode. Firstly, the three‐dimensional (3D) unsteady flow equations were solved using SST <i>k‐</i>ω turbulence model during the numerical calculations. Secondly, the numerical results of the hydraulic pump performance were validated by the experimental measurements for numerical accuracy. Lastly, pressure transducers are positioned at certain monitoring points to measure the pressure in the PAT investigated. The numerical and experimental results show that the main frequency of the pressure pulsation is equal to the blade frequency, and as it deviates from the design operating condition, the magnitude of pressure pulsation intensifies. Furthermore, the impeller eye marked the lowest pressure coefficients especially at the design condition and makes it highly susceptible to cavitation. High pressure coefficients were obviously seen at the pressure side on the blade surface closer to the trailing edge at all studied operating conditions. Meanwhile, the rotor‐stator interaction generated the highest pressure pulsation distribution at the volute tongue. Thus, modification of the volute tongue is an optimal approach of reducing the pressure pulsation intensity in the volute and pump as a whole.

Experimental Test on Distribution Characteristics of Power Losses of a High-speed Axial Piston Pump for Electro Hydrostatic Actuator

Experimental Study of Frictional Torque Properties of Plane Port Pairs in Axial Piston Pump

Real-time Measurement on Lubrication Characteristic Parameters of Plane Port Pair in Axial Piston Pumps

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Analysis on dynamic experimental system of lubrication film properties of friction pairs in axial piston pump

Flow characteristics simulation and low-noise design of fuel piston pump

Development And Simulation Of Lubrication Test System For Port Plate/Cylinder Block In Axial Piston Pump

Distribution characteristics and impact on pump’s efficiency of hydro-mechanical losses of axial piston pump over wide operating ranges

Pressure and Flow Characteristic Modeling of Water Hydraulic Axial Piston Pump Based on Variable Fluid Properties

Experimental Study on the Influence of the Rotating Cylinder Block and Pistons on Churning Losses in Axial Piston Pumps

Characteristics of Volumetric Losses and Efficiency of Axial Piston Pump with Respect to Displacement Conditions

Modeling and Analysis of the Churning Losses Characteristics of Swash Plate Axial Piston Pump

Analysis and test of no-load pressure drop in an integrated hydrostatic-driven electric generator

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Analysis and Experimental Research on Efficiency Characteristics of a Deep-Sea Hydraulic Power Source

Experimental Study of an Insert and Its Influence on Churning Losses in a High-Speed Electro-Hydrostatic Actuator Pump of an Aircraft

Churning Losses Analysis on the Thermal-Hydraulic Model of a High-Speed Electro-Hydrostatic Actuator Pump

Analysis of the Cylinder Block Tilting Inertia Moment and Its Effect on the Performance of High-Speed Electro-Hydrostatic Actuator Pumps of Aircraft

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

A Novel Pulsation Attenuator for Aircraft Piston Pump

Effect of Piston-Slipper Assembly Mass Difference on the Cylinder Block Tilt in a High-Speed Electro-Hydrostatic Actuator Pump of Aircraft