Abstract:Recycling is a potential solution to narrow the gap between the supply and demand of raw materials for lithium-ion batteries (LIBs). However, the efficient separation of the active components and their recovery from battery waste remains a challenge. This paper evaluates the influence of three potential routes for the liberation of LIB components (namely mechanical, thermomechanical, and electrohydraulic fragmentation) on the recovery of lithium metal oxides (LMOs) and spheroidized graphite particles using froth flotation. The products of the three liberation routes were characterized using SEM-based automated image analysis. It was found that the mechanical process enabled the delamination of active materials from the foils, which remained intact at coarser sizes along with the casing and separator. However, binder preservation hinders active material liberation, as indicated by their aggregation. The electrohydraulic fragmentation route resulted in liberated active materials with a minor impact on morphology. The coarse fractions thus produced consist of the electrode foils, casing, and separator. Notwithstanding, it has the disadvantage of forming heterogeneous agglomerates containing liberated active particles. This was attributed to the dissolution of the anode binder and its rehardening after drying, capturing previously liberated particles. Finally, the thermomechanical process showed a preferential liberation of individual anode active particles and thus was considered the preferred upstream route for flotation. However, the thermal treatment oxidized Al foils, rendering them brittle and resulting in their distribution in all size fractions. Among the three, the thermomechanical black mass showed the highest flotation selectivity due to the removal of the binder, resulting in a product recovery of 94.4% graphite in the overflow and 89.4% LMOs in the underflow product.

Recycling of electrode materials from spent lithium-ion battery by pyrolysis-assisted flotation

Spent Lithium-Ion Battery Recycling Using Flotation Technology: Effect of Material Heterogeneity on Separation Performance

Effect of lithium ion on the separation of electrode materials in spent lithium ion batteries using froth flotation

Efficient recovery of electrode materials from lithium iron phosphate batteries through heat treatment, ball milling, and foam flotation

The Recycling of Spent Lithium-Ion Batteries: Crucial Flotation for the Separation of Cathode and Anode Materials

Influences of plasma treatment parameters on the hydrophobicity of cathode and anode materials from spent lithium-ion batteries

Recycling of valuable metals from spent cathode material by organic pyrolysis combined with in-situ thermal reduction

Pyrolysis and physical separation for the recovery of spent LiFePO4 batteries

Improving Separation Efficiency in End-of-Life Lithium-Ion Batteries Flotation Using Attrition Pre-Treatment

Lithium-Ion Battery Recycling─Influence of Recycling Processes on Component Liberation and Flotation Separation Efficiency

Recovery of Graphite and Cathode Active Materials from Spent Lithium-Ion Batteries by Applying Two Pretreatment Methods and Flotation Combined with a Rapid Analysis Technique

Characteristics of Spent Lithium Ion Batteries and Their Recycling Potential Using Flotation Separation: A Review

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

Pre-separation combined with reduction roasting for high-quality recovery of graphite and lithium from spent lithium ion batteries

Study on Pyrolysis Pretreatment Characteristics of Spent Lithium-Ion Batteries

Short-term and High-performance Recycling of Cathode Material from Spent Lithium Ion Batteries

Mixed crushing and competitive leaching of all electrode material components and metal collector fluid in the spent lithium battery

Recovery of Electrode Materials from a Spent Lithium-Ion Battery through a Pyrolysis-Coupled Mechanical Milling Method

A novel pulsated pneumatic separation with variable-diameter structure and its application in the recycling spent lithium-ion batteries

Organics removal combined with in situ thermal-reduction for enhancing the liberation and metallurgy efficiency of LiCoO2 derived from spent lithium-ion batteries

Advances in the Separation of Graphite from Lithium Iron Phosphate from End-of-Life Batteries Shredded Fine Fraction Using Simple Froth Flotation