Abstract:The assembly of proton exchange membrane (PEM) fuel cell has a significant influence on contact pressure of BP and GDL, which affects key parameters of GDL including contact resistance, porosity, and permeability. In this study, a large-scale finite element method (FEM) PEM fuel cell model is developed considering realistic assembly, which is assembled by 14 bolts. The contact pressure at the interface of GDL and BP is converted into non-uniform contact resistance incorporated into a self-developed "3D + 1D" full PEM fuel cell multi-phase model with the active area of 108 cm 2 . The "3D + 1D" model simplifies part of components along through-plane direction into 1D model to improve calculation efficiency and stability. The results show that the performance reduces slightly when considering non-uniform contact resistance compared with that considering uniform contact resistance. The uniformity of current density and temperature distributions reduces evidently when considering non-uniform contact resistance affecting the performance and durability, which demonstrates the necessity of treatment of non-uniform contact resistance. Furthermore, the effects of porosity and permeability of deformed GDL under different preloading torques on performance are investigated. It is found that the contact resistance reduces first and then flats as the preloading torques increase, which results in the same trend of electronic ohmic loss, while the concentration loss nearly linearly increases. The simulation shows that the PEM fuel cell shows the best performance when the preloading torque is 3 Nm. This study provides some meaningful guidance for PEM fuel cell stack assembly.

Research on Design and Optimization of Large Metal Bipolar Plate Sealing for Proton Exchange Membrane Fuel Cells

Sealing Performance of Ethylene Propylene Diene Monomer Seals for Proton Exchange Membrane Fuel Cells

Design of Honeycomb‐Filled End Plate for Proton Exchange Membrane Fuel Cells Based on Topology Optimization

A mechanism leakage model of metal-bipolar-plate PEMFC seal structures with stress relaxation effects

A Review on the Sealing Structure and Materials of Fuel-Cell Stacks

Elucidating the automobile proton exchange membrane fuel cell of innovative double-cell structure by full-morphology simulation

Study of Contact Pressure Distribution in Bolted Encapsulated Proton Exchange Membrane Fuel Cell Membrane Electrode Assembly

Endplate Design and Analysis of Fuel Cells

Non-uniform Design of Proton Exchange Membrane Fuel Cell and Its Matching with Operations

Elucidating non-uniform assembling effect in large-scale PEM fuel cell by coupling mechanics and performance models

Microscale structure optimization of catalyst layer for comprehensive performance enhancement in proton exchange membrane fuel cell

Water management and structure optimization study of nickel metal foam as flow distributors in proton exchange membrane fuel cell

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

A novel intersectant flow field of metal bipolar plate for proton exchange membrane fuel cell

Investigation and optimization of the ultra-thin metallic bipolar plate multi-stage forming for proton exchange membrane fuel cell

Research Progress and Prospects of Bipolar Plate Materials for Proton Exchange Membrane Fuel Cells

Current status of research on composite bipolar plates for proton exchange membrane fuel cells (PEMFCs): nanofillers and structure optimization

Research Progress in Surface Modification of Metal Bipolar Plates for Proton Exchange Membrane Fuel Cells

Development of a High-Performance Proton Exchange Membrane:From Structural Optimization to Quantity Production

Structured mesh material with gradient surface wettability for high-power-density proton exchange membrane fuel cells

Study on a New Static Sealing Method and Sealing Performance Evaluation Model for PEMFC