Abstract:The assembly of proton exchange membrane (PEM) fuel cell has a significant influence on contact pressure of BP and GDL, which affects key parameters of GDL including contact resistance, porosity, and permeability. In this study, a large-scale finite element method (FEM) PEM fuel cell model is developed considering realistic assembly, which is assembled by 14 bolts. The contact pressure at the interface of GDL and BP is converted into non-uniform contact resistance incorporated into a self-developed "3D + 1D" full PEM fuel cell multi-phase model with the active area of 108 cm 2 . The "3D + 1D" model simplifies part of components along through-plane direction into 1D model to improve calculation efficiency and stability. The results show that the performance reduces slightly when considering non-uniform contact resistance compared with that considering uniform contact resistance. The uniformity of current density and temperature distributions reduces evidently when considering non-uniform contact resistance affecting the performance and durability, which demonstrates the necessity of treatment of non-uniform contact resistance. Furthermore, the effects of porosity and permeability of deformed GDL under different preloading torques on performance are investigated. It is found that the contact resistance reduces first and then flats as the preloading torques increase, which results in the same trend of electronic ohmic loss, while the concentration loss nearly linearly increases. The simulation shows that the PEM fuel cell shows the best performance when the preloading torque is 3 Nm. This study provides some meaningful guidance for PEM fuel cell stack assembly.

Sealing Performance of Ethylene Propylene Diene Monomer Seals for Proton Exchange Membrane Fuel Cells

Research on Design and Optimization of Large Metal Bipolar Plate Sealing for Proton Exchange Membrane Fuel Cells

Structure Failure of the Sealing in the Assembly Process for Proton Exchange Membrane Fuel Cells

Study of Contact Pressure Distribution in Bolted Encapsulated Proton Exchange Membrane Fuel Cell Membrane Electrode Assembly

Material Behavior of Rubber Sealing for Proton Exchange Membrane Fuel Cells

A Review on the Sealing Structure and Materials of Fuel-Cell Stacks

An Analytical Model for Gas Leakage Through Contact Interface in Proton Exchange Membrane Fuel Cells

Study on Assembly Error Effect on the Performance of Proton Exchange Membrane Fuel Cell Considering Membrane Electrode Assembly Deformation

Assembly and Performance Modeling of Proton Exchange Membrane Fuel Cells

A mechanism leakage model of metal-bipolar-plate PEMFC seal structures with stress relaxation effects

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Mechanical Degradation of Proton Exchange Membrane During Assembly and Running Processes in Proton Exchange Membrane Fuel Cells with Metallic Bipolar Plates

Elucidating non-uniform assembling effect in large-scale PEM fuel cell by coupling mechanics and performance models

Effect of flow channel shapes of proton exchange membrane fuel Cell on its performances

Study on a New Static Sealing Method and Sealing Performance Evaluation Model for PEMFC

Preparation of an Integrated Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells Using a Novel Wet-Bonding Strategy

Influence of structure construction on water uptake, swelling, and oxidation stability of proton exchange membranes

Stress response and contact behavior of PEMFC during the assembly and working condition

Characterization of Polyethylene-Graft-Sulfonated Polyarylsulfone Proton Exchange Membranes for Direct Methanol Fuel Cell Applications

Unveiling the long-term degradation mechanisms of the sealing structures for durable PEM fuel cells by ex situ accelerated stability evaluation of a membrane electrode assembly

Analysis and Experimental Verification of the Sealing Performance of PEM Fuel Cell Based on Fractal Theory