Abstract:The flow in gas turbines exhibits a highly unsteady, complex and nonuniform manner, which presents two main challenges. Firstly, it introduces instrumentation errors, contributing to uncertainties when calculating one-dimensional performance metrics during rig or engine tests using fixed-location rakes. Secondly, it raises mechanical concerns, including high-cycle fatigue due to blade row interactions in turbomachines and thermal fatigue caused by hot-streaks at the combustor exit. Experimental characterisation of the flow nonuniformity in gas turbines is highly challenging due to the confined space and harsh environment for instrumentation. This paper presents recent efforts to address this issue by resolving the nonuniform flow in gas turbines using spatially under-sampled measurements. The proposed approach utilises discrete probe data and leverages a 'Fourier-based approximation' method developed by the author. The technique has undergone preliminary experimental validation involving reconstruction of the total pressure distribution in a multi-stage axial compressor and the total temperature field at the exit of the combustor and high-pressure turbine. Results show that, in the multi-stage axial compressor environment, reconstruction of inter-stage total pressure is achieved using a reduced dataset covering less than 20% of the annulus with reasonably good accuracy. The reconstructed total pressure yields almost identical mean total pressure values at all spanwise locations, with a maximum deviation of less than 0.02%. Additionally, reconstruction of the total temperature distribution at an engine-representative full annulus combustor is achieved using measurements at ten carefully selected circumferential locations. Results show that the reconstructed temperature field successfully captures the primary features associated with combustor exit temperature flow. The reconstructed temperature field yields excellent agreement in the magnitude of radial temperature distribution factor (RTDF) and overall temperature distribution factor (OTDF) predictions to the experiment, with a deviation of less than 0.5% for RTDF and less than 2.5% for OTDF. Lastly, reconstruction of the total temperature distribution at the exit of the GE E3 high-pressure turbine (HPT) is achieved using measurements at eight carefully selected circumferential locations. Results demonstrate remarkable robustness in resolving the temperature profile at the HPT exit with high fidelity, irrespective of the HPT inlet conditions. The initial validation results are promising, demonstrating that the new probe layout scheme and the Fourier-based approximation method enable effective characterisation of flow nonuniformity in gas turbines, thereby providing valuable insights into the complex flow of gas turbine engines.

Lessons Learned Toward Estimating the High-Pressure Turbine Inlet Temperature Profile Using Measurements Acquired at the High-Pressure Turbine Exit

Reconstructing Turbine Non-Uniform Flow Including Hot Streaks Using Spatially Under-Sampled Measurements

An Experimental Study of Turbine Vane Film Cooling Using Endoscope-Based PSP Technique in a Single-Passage Wind Tunnel

Transpiration Cooling of High Pressure Turbine Vane with Optimized Porosity Distribution

A TEMPERATURE-GRADIENT CORRECTION METHOD FOR FILM COOLING EFFECTIVENESS MEASUREMENT USING ENDOSCOPE-BASED PSP TECHNIQUE

Investigation of Gas Composition Effects on the Aerothermal Characteristics of A Film-Cooled Flat Plate at High-Temperature Conditions

Conjugate Heat Transfer Analysis to Assess Overall Cooling Effectiveness of High Pressure Turbine Nozzle With Optimized Film Cooling Hole Arrangements

Through-Flow Calculation with A Cooling Model for Cooled Turbines

Resolving nonuniform flow in gas turbines: challenges, progress, and moving forward

Coupled Heat Transfer Predictions of Thermal Environment for a Turbine Rotor

Analysis of the aerothermal performance of modern commercial high-pressure turbine rotors using different levels of fidelity

Multi-Fidelity Modelling of the Effect of Combustor Traverse on High-Pressure Turbine Temperatures

Numerical Investigation on Unsteady Effects of Hot Streak on Flow and Heat Transfer in A Turbine Stage

Numerical Investigations of Flows and Heat Transfer in Turbine Disk Cavities

Numerical Simulation for Heat Transfer Properties at Trailing Edge of Gas Turbine Airfoils

A Discussion: Issue Improving the Accuracy of Turbine Blade Heat Transfer Simulation

Experimental Evidence of Temperature Ratio Effect on Turbine Blade Tip Heat Transfer

Through Flow Calculations For Convective Cooled Turbines

Radiative Effectiveness on the Aero- and Thermodynamics in a Highly Thermally Loaded Film Cooling System

Measurements of Detailed Heat Transfer Characteristics on a High-Pressure Turbine Vane Endwall with Coolant Injection

Concurrent Effects of Hot Streak and Gas Species Concentration on Aerothermal Characteristics in a Turbine Stage