Abstract:For the sake of people's health and the safety of the environment, more efforts should be directed towards the fabrication of gas sensors that can operate effectively at room temperature (RT). In this context, increased attention has been paid to developing gas sensors based on rare-earth (RE)-doped transparent conducting oxides (TCO). In this report, lanthanum-doped zinc oxide (La-doped ZnO) films were fabricated by sol-gel and spin-coating techniques. XRD analysis revealed the hexagonal structure of the ZnO films, with preferred growth along the (002) direction. The crystallite size was decreased from 33.21 to 26.41 nm with increasing La content to 4.0 at.%. The UV-vis-NIR indicating that the films are highly transparent (˃ 80%), La-doping increased the UV blocking ability of the films and narrowed the optical band gap (Eg) from 3.275 to 3.125 eV. Additionally, La-doping has influenced the refractive index of the samples. Gas sensing measurements were performed at ambient temperature (30 °C) and a relative humidity (RH) of 30%, employing different flow rates of carbon dioxide (CO2) gas used synthetically with air. Among the evaluated sensors, the ZnO: 4.0 at.% La sensor exhibited the most significant gas response, with a value of 114.22%. This response was observed when the sensor was subjected to a flow rate of 200 SCCM of CO2 gas. Additionally, the sensor revealed a response time of 24.4 s and a recovery time of 44 s. The exceptional performance exhibited by the sensor makes it very appropriate for a wide range of industrial applications. Additionally, we assessed the effect of humidity, selectivity, reusability, repeatability, detection limit, and limit of quantification.

A Micro Room Temperature Oxygen Sensor Based on LaF3 Solid Electrolyte Thin Film

A potentiometric oxygen sensor based on LaF3 using Pt micro grid as the sensing electrode.

Design of high concentration oxygen sensor based on MEMS chip

Room temperature solid electrolyte ozone sensor based on Ag-doped SnO 2

A micro oxygen sensor based on a nano sol-gel TiO2 thin film.

Design, fabrication and performance of SO2 sensor based on LaF3 solid-electrolyte

Room-Temperature O3 Detection: Zero-Bias Sensors Based on ZnO Thin Films

Aligned Nanofibers Incorporated Composite Solid Electrolyte for High-Sensitivity Oxygen Sensing at Medium Temperatures

A Micro Sensor Based on TiO2 Nanorod Arrays for the Detection of Oxygen at Room Temperature

Room temperature triethylamine gas sensor with excellent performances based on novel porous CuO foam via a simple and facile route

Design of high-sensitivity La-doped ZnO sensors for CO2 gas detection at room temperature

Room Temperature Operated Flexible La-ZnO/MWCNTs Sensor for ppb Level Carbon Monoxide Detection

Low Temperature Preparation of YSZ-based Thin-Film Limiting Current Type Oxygen Sensor

Fabrication and characterization of nano-sized SrTiO/sub 3/-based oxygen sensor for near room-temperature operation

Room Temperature Mixed-Potential Solid-Electrolyte NO 2 Sensor for Environmental Monitoring

Visible Light-Induced Room-Temperature Formaldehyde Gas Sensor Based on Porous Three-Dimensional ZnO Nanorod Clusters with Rich Oxygen Vacancies.

A miniature room temperature formaldehyde sensor with high sensitivity and selectivity using CdSO4 modified ZnO nanoparticles

Room Temperature Sensing of Volatile Organic Compounds Using Hybrid Layered SnO Mesoflowers and Laser-Induced Graphitic Carbon Devices

A Humidity‐Resistant, Sensitive, and Stretchable Hydrogel‐Based Oxygen Sensor for Wireless Health and Environmental Monitoring

Chemiresistors with In2O3 Nanostructured Sensitive Films Used for Ozone Detection at Room Temperature

UV-activated SnO 2 thin film for air-atmospheric oxygen sensing at room temperature