Abstract:New compressed liquid densities (ρ) of thiophene + heptane and thiophene + octane are reported in the temperature range from (313 to 363) K, with pressure up to 25 MPa. The compositions are x(1) = 0.1049, 0.2471, 0.5097, 0.7494, and 0.8994 for thiophene (1) + heptane (2), and x(1) = 0.1042, 0.2530, 0.5037, 0.7516, and 0.8988 for thiophene (1) + octane (2). The experimental system uses a vibrating tube densimeter (VTD) and three calibration methods (the first uses hexane and water, the second uses nitrogen and water, and the third uses water and applying vacuum to the VTD as calibration reference fluids). The reported density data are determined using the third method, which notifies the lowest uncertainty and estimates a maximum relative expanded uncertainty ( k = 2 ) of 0.21 % in the temperature range from (313 to 363) K and pressures up to 25 MPa. The pure compound densities were calculated from previous density measurements represented by the Pimentel-Galicia model. This empirical correlation of the pure compounds was used before for the excess molar volume calculation. The experimental data of the mixtures reported in this work were modeled by the Pimentel-Galicia model at each composition with deviations not higher than 0.07 %. The combined standard uncertainty for composition (considering the purities of the samples) is u c x = 0.0026. Finally, the isothermal compressibility and isobaric thermal expansivity were evaluated from density data.

Liquid Densities of N-Octane, Ethylcyclohexane and Their Binary Mixtures {(x) N-Octane) + (1 − X) Ethylcyclohexane} at Temperatures from (283 to 363) K and Pressures Up to 60 MPa

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Liquid Densities for N-Decane + P-Xylene Mixtures from 293.15 K to 363.15 K at Pressures Up to 60 MPa

Measuring and Modeling the Density of Some Typical Binary Mixtures in the Conditions of 280-423.15 K and 0.1-9 MPa

Liquid density of binary mixtures of n -pentane and n -dodecane at temperatures from 283K to 363K and pressures up to 100MPa

High-pressure Densities of N-Decane+o-xylene Mixtures: Measurement and Modelling

Compressed liquid densities of binary mixtures of n-decane + n-dodecane at temperatures from 283 K to 363 K and pressures up to 100 MPa

High-Pressure Densities and Derived Thermodynamic Properties of Cyclopentane/n-Octane Mixtures from 293.15 K to 363.15 K

PρT Measurements and Modelling of (N-Decane + M-Xylene) Mixtures from 293.15 K to 363.15 K at Pressures Up to 60 MPa

Compressed Liquid Densities for Cyclopentane/n-Heptane Mixtures from 293.15 K to 363.15 K at Pressures Up to 70 MPa

Viscosity Measurements for N-Octane, Ethylcyclohexane, and Their Binary Mixtures from 283 to 363 K at Pressures Up to 20 MPa

Density, Viscosity, and Freezing Point for Four Binary Systems of N-Dodecane or Methylcyclohexane Mixed with 1-Heptanol or Cyclohexylmethanol

Liquid Density of Biofuel Mixtures: 1-Heptanol + Heptane System at Pressures Up to 140 Mpa and Temperatures from 298.15 K to 393.15 K

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Thermodynamic Properties of Binary Mixtures of<i>p</i>-Xylene with Cyclohexane, Heptane, Octane, and<i>N</i>-Methyl-2-pyrrolidone at Several Temperatures

Measurements of Density and Heat Capacity for Binary Mixtures {x Benzonitrile + (1 −x) (octane or Nonane)}

Volumetric Properties of N -Hexadecane/ethyl Octanoate Mixtures from 293.15 K to 363.15 K and Pressures Up to 60 MPa

Densities and Viscosities of Binary Mixtures of Ethylbenzene Plus N-Methyl-2-Pyrrolidone, Ethylbenzene Plus Sulfolane, and Styrene Plus Octane from (303.15 to 353.15) K and Atmospheric Pressure

Densities and excess molar volumes of thiophene + heptane and thiophene + octane at temperatures between (313 K and 363) K and pressures up to 25 MPa using three calibration methods

Measurements of density and heat capacity for binary mixtures { x benzonitrile + (1-x) (octane or nonane)}