Abstract:Densities of compressed CO2 + undecane binary mixtures were measured using a magnetic suspension balance (MSB). Measurements were made at temperatures ranging from 313.15 to 353.15 K and pressures ranging from 8 to 19 MPa at CO2 mole fractions (x(1)) of 0, 0.2483, 0.4641, 0.6797, and 0.8874. The mixture densities were found to increase linearly with pressure and decrease with temperature; this behavior is similar to that of CO2 + decane or dodecane mixtures. The mixture densities show a crossover with composition when the CO2 mole fraction is high. The densities of alkanes increase almost linearly with carbon number, as do the densities of CO2 + alkane mixtures. With the of CO2 mole fraction, the mixture densities increase at first, then decrease. The increase of pressure makes the excess molar volume less negative, whereas the increase of temperature makes it more negative. Densities calculated from the perturbed hard chain equation of state (PHSC EOS) with improved parameters are in good agreement with the experimental densities. Adopting the constant binary interaction parameter k(ij) for different alkanes in the PHSC EOS slightly enlarge the model deviation but simplifies the calculation.

Volumetric Properties of N -Hexadecane/ethyl Octanoate Mixtures from 293.15 K to 363.15 K and Pressures Up to 60 MPa

Density and Volumetric Properties of Binary Mixtures of CO2 + Hexadecane from (303.2 to 473.2) K and Pressures Up to 50.0 MPa

High-Pressure Liquid Viscosity of N-Hexadecane/ethyl Octanoate Mixtures

Liquid Densities of N-Octane, Ethylcyclohexane and Their Binary Mixtures {(x) N-Octane) + (1 − X) Ethylcyclohexane} at Temperatures from (283 to 363) K and Pressures Up to 60 MPa

High-Pressure Densities and Derived Thermodynamic Properties of Cyclopentane/n-Octane Mixtures from 293.15 K to 363.15 K

Compressed Liquid Densities for Cyclopentane/n-Heptane Mixtures from 293.15 K to 363.15 K at Pressures Up to 70 MPa

High-pressure Densities of N-Decane+o-xylene Mixtures: Measurement and Modelling

Liquid Densities for N-Decane + P-Xylene Mixtures from 293.15 K to 363.15 K at Pressures Up to 60 MPa

Densities and Viscosities of Ethyl Heptanoate and Ethyl Octanoate at Temperatures from 303 to 353 K and at Pressures up to 15 MPa

Temperature and Pressure Dependence of Densities and Viscosities for Binary Mixtures of Methyl Decanoate Plus N-Heptane

Density and Volumetric Behavior of Co2 + Undecane System from 313.15 to 353.15 K and Pressures Up to 19 Mpa

PρT Measurements and Modelling of (N-Decane + M-Xylene) Mixtures from 293.15 K to 363.15 K at Pressures Up to 60 MPa

Liquid density of binary mixtures of n -pentane and n -dodecane at temperatures from 283K to 363K and pressures up to 100MPa

Density, Viscosity, and Freezing Point for Four Binary Systems of N-Dodecane or Methylcyclohexane Mixed with 1-Heptanol or Cyclohexylmethanol

Viscosity Measurements for N-Octane, Ethylcyclohexane, and Their Binary Mixtures from 283 to 363 K at Pressures Up to 20 MPa

Densities And Viscosities Of Binary Mixtures Of 2,2,4-Trimethylpentane+1-Propanol,+1-Pentanol,+1-Hexanol, And+1-Heptanol From (298.15 To 323.15) K

Measuring and Modeling the Density of Some Typical Binary Mixtures in the Conditions of 280-423.15 K and 0.1-9 MPa

Isobaric Molar Heat Capacity of Ethyl Octanoate and Ethyl Decanoate at Pressures Up to 24 MPa

Measurements of Density and Viscosity of 1-Hexadecanol in the Temperature Range from (328.15 to 623.15) K at Pressures Up to 10 MPa

Compressed liquid densities of binary mixtures of n-decane + n-dodecane at temperatures from 283 K to 363 K and pressures up to 100 MPa

Densities and viscosities of binary mixtures of exo - tetrahydrodicyclopentadiene with N -undecane or N -tetradecane at T = (293.15 to 313.15) K