Abstract:This work presents new experimental viscosity and density data for aromatic and polyaromatic compounds in binary and ternary pyrene, 1-methylnaphthalene, and dodecane mixtures. The lack of experimental viscosity data for these mixtures requires the development of a new database, which is vital for understanding the behavior of mixtures in more complex systems, such as asphaltenes and fuels. The mixtures proposed in this work have been measured over a temperature range of (293.15 to 343.15) K at atmospheric pressure. Several mixture compositions have been studied at these conditions: 1.0, 2.5, 5.0, 7.5, 10.0, 12.5, and 15.0% pyrene mass fraction. The concentration of pyrene correlates with an increase in the viscosity and density values. At the lowest temperature in binary mixtures, the corresponding values reach 4.4217 mPa·s for viscosity and 1.0447 × 103 kg·m-3 for density, respectively. In ternary mixtures, the introduction of dodecane leads to the lowest maximum values of 3.5555 mPa·s for viscosity and 1.0112 × 103 kg·m-3 for density at the same temperature. The experimental data have been employed for the specific modification of viscosity models. These modifications could facilitate the prediction of the viscosity of mixtures that are more complex than those presented in this work. Various viscosity models have been employed, such as Linear, Ratcliff and Khan, modified UNIFAC-Visco, and Krieger-Dougherty. The settings in the models used reliably reproduce the experiment reliably. However, the Ratcliff model agrees excellently with the experiment, having a low standard deviation (2.0%) compared to other models. Furthermore, a model based on the equation of state of Guo is proposed to predict the viscosity values by modifying the specific parameters and adjusting them to the mixtures proposed in this work. The results from this study are compared to previous work, where pyrene, toluene, and heptane mixtures were analyzed. In this case, we find that the decrease of aggregation grade in the present systems is predicted by the model fixed in this work.

Mixing Properties of Tris(2-ethylhexyl) Phosphate with Alkanes at Different Temperatures and Data Treatment Using Several Correlation Equations Based on Eyring's Absolute Reaction Theory

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Thermodynamic Study of Binary Mixtures of Tricyclo[5.2.1.02.6]decane with N-methylpiperazine or Triethylamine at T=298.15–323.15K

Thermophysical properties: Viscosity, density, and excess properties of 2-propanol and n-Decane mixtures from 283.15 K to 343.15 K under atmospheric conditions

Measurement on Vapor Pressure, Density and Viscosity for Binary Mixtures of JP-10 and Methylcyclohexane

A Study on the Mixing Behavior of Glycerol with Aniline, Pyridine, and Piperidine over the Temperature Range 293.15 K to 323.15 K and Atmospheric Pressure

Measurement and Correlation of the Density, Viscosity and Vapor Pressure of Fatty Acid 2-Ethyhexyl Esters

Viscosities and Densities of Binary and Ternary Mixtures of Aliphatic and Polyaromatic Hydrocarbons: Pyrene +1-Methylnaphthalene + Dodecane at T = (293.15 to 343.15) K. Experiment and Modeling

Volumetric Properties of Binary Systems of Straight-chain Alkanes+JP-10

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Volumetric and Viscous Properties for Binary Mixtures of N-Methylpiperazine with Ethyl Acetate or Butyl Acetate from 298.15 K to 313.15 K

Viscosities and densities for binary mixtures of -methylpiperazine with methanol, ethanol, -propanol, -propanol, -butanol and -butanol at 293.15, 298.15 and 303.15K

Densities And Viscosities Of Binary Mixtures Of Jp-10 With N-Octane Or N-Decane At Several Temperatures

Thermophysical properties of binary liquid mixtures at various temperatures, supported by FTIR spectral studies and correlation with the Jouyban–Acree model (allyl alcohol, benzyl aldehyde, benzylamine and benzyl alcohol)

Comparative analysis of some representative models of viscosity versus pressure in the case of various hydrocarbons and their mixtures

Densities, viscosities and refractive indices of binary liquid mixtures of methyl tert-butyl ether or ethyl tert-butyl ether with a hydrocarbon fuel

Densities and Viscosities for the Ternary Mixtures of n-Undecane (1) + Butylcyclohexane (2)+1-Pentanol (3) and Corresponding Binaries at T = (293.15 to 333.15) K

Physicochemical properties, theoretical modelling and molecular interaction analysis in ternary liquid mixtures containing 1-propanol, 1,3-diaminopropane and ethyl acetate at temperature 298.15–318.15 K

A Molecular Dynamics Simulation Study of the Densities and Viscosities of 1,2,4-Trimethylbenzene and Its Binary Mixture with N-Decane