Abstract:Biofuels are increasingly recognized as the most practical way to reduce carbon dioxide emissions and pollution in the transport industry. However, the production and promotion of biofuels have encountered many obstacles due to their complex composition and the ambiguity in studies on the physicochemical properties. To achieve a thorough comprehension of biofuel density and viscosity properties, developing suitable surrogate mixtures is an accurate and efficient method. N-Octane, ethylcyclohexane, and ethylbenzene are important components of biofuel surrogate mixtures to reflect the thermophysical properties of three primary hydrocarbons (alkanes, cycloalkanes, and alkylbenzenes). Therefore, the liquid density and viscosity of ternary mixtures (n-octane + ethylcyclohexane + ethylbenzene) are measured using a vibrating-tube densimeter and vibrating-wire viscometer, respectively, over the temperature range from 283.15 to 363.15 K and at pressures of up to 60 MPa. Moreover, the excess volume and viscosity deviations of the mixtures were obtained. For density, the group contribution (GC) PC-statistical associating fluid theory (PC-SAFT) equation of state (EoS) and SAFT-γ Mie EoS have been compared to assess the effect of different interaction potential functions on the prediction of liquid-phase densities. The results showed that the SAFT-γ Mie EoS gave the best prediction, followed by the GC PC-SAFT EoS. In terms of viscosity, a new mapping law for effective molecular weight has been developed to improve the predictive accuracy of the 1-cEHS model, and the absolute average deviations (AAD%) are 3.3–5%. In addition, excess molar volumes and viscosity deviations in this work are derived and discussed to further explore the influence of different molecular structures on thermophysical properties.

A Molecular Dynamics Simulation Study of the Densities and Viscosities of 1,2,4-Trimethylbenzene and Its Binary Mixture with N-Decane

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Experimental and Modeling Investigations of Density and Viscosity for the Ternary ( N -Octane + Ethylcyclohexane + Ethylbenzene) Mixtures

Molecular dynamics study on viscosities of sub/supercritical n-decane, n-undecane and n-dodecane

Density and Viscosity Measurements on the Ternary System of Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + Iso-Butanol (3) and Corresponding Binary Systems

Densities and Viscosities for the Ternary Mixture of N-Undecane (1) + Methyl Decanoate (2) + N-Butanol (3) and Corresponding Binaries from T=293.15 to 333.15 K and at Atmospheric Pressure

Molecular dynamics simulation of thermophysical properties of binary RP-3 surrogate fuel mixtures containing trimethylbenzene, n-decane, and n-dodecane

Densities and Viscosities for the Ternary Mixtures of n-Undecane (1) + Butylcyclohexane (2)+1-Pentanol (3) and Corresponding Binaries at T = (293.15 to 333.15) K

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Thermodynamic Study of Binary Mixtures of Tricyclo[5.2.1.02.6]decane with N-methylpiperazine or Triethylamine at T=298.15–323.15K

Density and Viscosity of the Ternary System Pinane + N-Dodecane + Methyl Laurate and Corresponding Binary Systems at T = 293.15–333.15 K

Molecular dynamics study on the kinematic viscosity, density and structure of fuel blends containing n-decane and biofuel compound of ethyl decanoate or ethyl dodecanoate

Measurement on Vapor Pressure, Density and Viscosity for Binary Mixtures of JP-10 and Methylcyclohexane

Densities, viscosities and refractive indices of binary liquid mixtures of methyl tert-butyl ether or ethyl tert-butyl ether with a hydrocarbon fuel

Densities and Viscosities of the Ternary Mixtures of Decalin (1) + n-Hexadecane (2)+1-Butanol (3) and Corresponding Binary Systems

Density, Viscosity, and Freezing Point for Four Binary Systems of N-Dodecane or Methylcyclohexane Mixed with 1-Heptanol or Cyclohexylmethanol

Densities and Viscosities of Ternary System N-Dodecane (1) + Bicyclohexyl (2) + N-Butanol (3) and Corresponding Binaries at T = (293.15 to 333.15) K

Mixing Properties of Tris(2-ethylhexyl) Phosphate with Alkanes at Different Temperatures and Data Treatment Using Several Correlation Equations Based on Eyring's Absolute Reaction Theory

Simultaneous measurement of the density and viscosity for n-Decane + CO2 binary mixtures at temperature between (303.15 to 373.15) K and pressures up to 80 MPa

Densities and Viscosities for the Ternary System of Isopropylcyclohexane (1) + <i>n</i>-Tridecane (2) + <i>n</i>-Butanol (3) and Corresponding Binaries at <i>T</i>=293.15 to 333.15 K

Densities and Viscosities for the Ternary Mixtures of Exo-Tetrahydrodicyclopentadiene (1) + Isopropylcyclohexane (2) + Methyl Laurate (3) and Corresponding Binaries