Abstract:Biofuels are increasingly recognized as the most practical way to reduce carbon dioxide emissions and pollution in the transport industry. However, the production and promotion of biofuels have encountered many obstacles due to their complex composition and the ambiguity in studies on the physicochemical properties. To achieve a thorough comprehension of biofuel density and viscosity properties, developing suitable surrogate mixtures is an accurate and efficient method. N-Octane, ethylcyclohexane, and ethylbenzene are important components of biofuel surrogate mixtures to reflect the thermophysical properties of three primary hydrocarbons (alkanes, cycloalkanes, and alkylbenzenes). Therefore, the liquid density and viscosity of ternary mixtures (n-octane + ethylcyclohexane + ethylbenzene) are measured using a vibrating-tube densimeter and vibrating-wire viscometer, respectively, over the temperature range from 283.15 to 363.15 K and at pressures of up to 60 MPa. Moreover, the excess volume and viscosity deviations of the mixtures were obtained. For density, the group contribution (GC) PC-statistical associating fluid theory (PC-SAFT) equation of state (EoS) and SAFT-γ Mie EoS have been compared to assess the effect of different interaction potential functions on the prediction of liquid-phase densities. The results showed that the SAFT-γ Mie EoS gave the best prediction, followed by the GC PC-SAFT EoS. In terms of viscosity, a new mapping law for effective molecular weight has been developed to improve the predictive accuracy of the 1-cEHS model, and the absolute average deviations (AAD%) are 3.3–5%. In addition, excess molar volumes and viscosity deviations in this work are derived and discussed to further explore the influence of different molecular structures on thermophysical properties.

Densities and Viscosities for the Ternary System of Isopropylcyclohexane (1) + <i>n</i>-Tridecane (2) + <i>n</i>-Butanol (3) and Corresponding Binaries at <i>T</i>=293.15 to 333.15 K

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Densities and Viscosities of Ternary System N-Dodecane (1) + Bicyclohexyl (2) + N-Butanol (3) and Corresponding Binaries at T = (293.15 to 333.15) K

Densities and Viscosities for the Ternary Mixtures of n-Undecane (1) + Butylcyclohexane (2)+1-Pentanol (3) and Corresponding Binaries at T = (293.15 to 333.15) K

Densities and Viscosities for the Ternary Mixture of N-Undecane (1) + Methyl Decanoate (2) + N-Butanol (3) and Corresponding Binaries from T=293.15 to 333.15 K and at Atmospheric Pressure

Densities and Viscosities for the Ternary System of Cyclopropanemethanol (1) + n-Dodecane (2) + Butylcyclohexane (3) and Corresponding Binaries at T = 293.15–343.15 K

Density and Viscosity Measurements on the Ternary System of Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + Iso-Butanol (3) and Corresponding Binary Systems

Densities And Viscosities For The Ternary System Of Exo-Tetrahydrodicyclopentadiene (1) + Methylcyclohexane (2) + Cyclopropanemethanol (3) And Its Binaries At T=293.15 To 333.15 K

Densities and Viscosities of the Ternary Mixtures of Decalin (1) + n-Hexadecane (2)+1-Butanol (3) and Corresponding Binary Systems

Densities and Viscosities for the Ternary Mixtures of Exo-Tetrahydrodicyclopentadiene (1) + Isopropylcyclohexane (2) + Methyl Laurate (3) and Corresponding Binaries

Densities And Viscosities For The Ternary System Of 1,2,3,4-Tetrahydronaphthalene Plus Isopropylcyclohexane Plus Cyclopropanemethanol And Corresponding Binaries At T = (293.15 To 343.15) K

Densities and Viscosities for the Ternary System of 1,2,3,4-Tetrahydronaphthalene + Isopropylcyclohexane + Cyclopropanemethanol and Corresponding Binaries at T = (293.15 to 343.15) K

Densities and viscosities for the ternary system of cyclopropanemethanol (1) + 2, 2, 4-trimethylpentane (2) + decalin (3) and corresponding binaries at T = 293.15–323.15 K

Densities and Viscosities for the Ternary System of Decalin + Methylcyclohexane + Cyclopentanol and Corresponding Binaries at T = 293.15 to 343.15 K

Density and Viscosity of the Ternary System Pinane + N-Dodecane + Methyl Laurate and Corresponding Binary Systems at T = 293.15–333.15 K

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Experimental and Modeling Investigations of Density and Viscosity for the Ternary ( N -Octane + Ethylcyclohexane + Ethylbenzene) Mixtures

Densities and Viscosities of the Ternary System Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + 1,2,3,4-Tetrahydronaphthalene (3) and the Corresponding Binary Systems at T = (293.15–333.15) K

Density, Viscosity, and Freezing Point for Four Binary Systems of N-Dodecane or Methylcyclohexane Mixed with 1-Heptanol or Cyclohexylmethanol

Density And Viscosity Of Ternary Mixture Of Cyclopentanol Plus Exo-Tetrahydrodicyclopentadiene+1,3-Dimethyladamantane