Abstract:The study investigates how silicon and aluminum influence phase transformation, especially bainite, and microstructure using transformation diagrams, and proposes a new martensite start temperature formula. Silicon decelerates bainite transformation, whereas aluminum accelerates it. Aluminum strongly promotes the formation of ferritic structures and induces Widmanstätten ferrite during continuous cooling. In isothermal treatment, aluminum promotes film‐like retained austenite formation and microstructure refinement. The impact of silicon and aluminum on phase transformation behavior, particularly bainite, and microstructure evolution in Fe–0.2C–2.5Mn steel are presented. Continuous–cooling–transformation (CCT) and time–temperature–transformation (TTT) diagrams are determined experimentally. An aluminum extended empirical formula is introduced to estimate the martensite start temperature (Ms) with a thorough assessment of existing formulae. Results show that aluminum significantly increases Ms and has a stronger influence on promoting ferritic microstructures than silicon. During continuous cooling, alongside bainite, formation of Widmanstätten structures is induced in aluminum‐alloyed steel at higher cooling rates due to increased prior austenite grain size. Silicon decelerates bainite transformation kinetics by enhancing austenite's chemical stability through carbon enrichment via preventing carbide precipitation and by strengthening austenite against displacive phase transformation via solid solution hardening. Although aluminum has similar effects, incubation time is shortened during isothermal treatment because of the increased driving force, which overcompensates for the retardation effects. A finer carbide‐free bainitic microstructure is achieved in aluminum‐alloyed steel with more pronounced film‐like retained austenite (RA) formation and superior carbon enrichment, improving RA stability and suppressing martensite–austenite island formation. Finally, with the proposed formula, an accurate approximation to experimental Ms is accomplished.

Influence of Aluminium Content on Carburization Dynamics and Kinetics of Bainite Transformation in Steel

Influence of Co and Al on Bainitic Transformation in Super Bainitic Steels

Effects of Al on the transformation behavior of high carbon steel during continuous cooling

Effect of Al on Pearlite Transformation and Spheroidization of High Carbon Steel

Influence of Al on pearlitic transformation of superbainitic steels

Effect of Pro-Eutectoid Ferrite on Subsequent Bainite Transformation Kinetics Simulation

Effects of Aluminum on the Microstructures of Transformation During Slow Cooling and Dynamic Phase Transformation of Undercooled Austenite of Hypereutectoid Steel

INFLUENCE OF THE PARTIAL SUBSTITUTION OF Si BY Al ON THE MICROSTRUCTURE OF HOT ROLLED TRIP STEELS BASED ON DYNAMIC TRANSFORMATION OF UNDERCOOLED AUSTENITE

Effects of Silicon and Aluminum Alloying on Phase Transformation and Microstructure Evolution in Fe–0.2C–2.5Mn Steel: Insights from Continuous–Cooling–Transformation and Time–Temperature–Transformation Diagrams

Study of the Platelike Bainitic Ferrite Growth Kinetics

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel

The Effect of Preexisting VC Carbides on the Bainite Transformation in Medium-Carbon High-Alloy Steel

Investigation of microstructural evolution and bainite transformation kinetics of multi-phase steel

Dilatometric Research on Pearlite-to-austenite Transformation of Fe–1C–1.44Cr Low-Alloy Steel

On Bainite Transformation Kinetics and Mechanism

Recent progress: bainite transformation in steels

Influences of Alloying Elements on Continuous Cooling Phase Transformation and Microstructures of Extremely Fine Pearlite

Bainite Transformation-Kinetics-Microstructure Characterization of Austempered 4140 Steel

Influence of Mn on microstrutcure and mecha nical properties of carbide-f ree bainitic steel

Carbide-Free Bainite in Medium Carbon Steel

Acceleration of Bainitic Transformation by Introducing AlN in Medium Carbon Steel