Abstract:The application of cyanate esters has been greatly limited by their high curing temperatures, which induce residual thermal stress and subsequently degrade their mechanical properties. In this study, hydroxybenzonitrile homologs (HBNx) were developed to reduce curing temperature of bisphenol E cyanate ester (BECE) while improving their mechanical properties. It was found that the position of hydroxy (‐OH) substituent in HBNx had a significant impact on the curing temperature of BECE. Among the homologs, ortho‐hydroxybenzonitrile (HBN2) demonstrated the highest reactivity, as indicated by quantum chemical calculations and confirmed by differential scanning calorimetry analysis. As a result, the curing temperature of BECE was effectively reduced from 250°C to 140°C with the addition of 15 wt% HBN2. Additionally, the addition of HBNx improved the mechanical properties of cyanate ester resins and their composites reinforced by quartz fibers (GF). Specifically, the mechanical properties of HBNx/BECE castings remained at high levels, with impact strength, tensile strength, and flexural strength measured at 38.6 kJ/m2, 94.5, and 100.0 MPa, respectively. Furthermore, the mechanical properties of GF/HBNx/BECE composites exhibited an overall improvement, with the maximum enhancements in short‐beam shear strength, tensile strength, and flexural strength reaching 78.0%, 27.3%, and 45.1%, respectively. Nevertheless, the hydroxy substituent position in HBNx had a relatively minor impact on these mechanical properties. This study presents a promising strategy for synergistically enhancing both the processability and mechanical properties of CE resins and their composites in a cost‐effective manner.

Reaction Mechanism of Bisphenol A Type Cyanate Ester and Phenols

Study on self-polymerization mechanism of bisphenol A type cyanate ester

Cure and thermal properties of cyanate ester resin containing naphthalene ring

Construction of Polythiophene/bi4o5i2 Nanocomposites to Promote Photocatalytic Degradation of Bisphenol A

Theoretical Study on the Cycloaddition Reaction of Phosphenium Cation and Formaldehyde

Synthesis of Aromatic Polyesters with Pendent Carboxyl Groups from Diphenolic Acid, Bisphenol a and Isophthaloyl Chloride by Interfacial Polycondensation

Synthesis, Cure Kinetics and Thermal Properties of the 2,7-Dihydroxynaphthalene Dicyanate

Catalytic Mechanisms of Triphenyl Bismuth, Dibutyltin Dilaurate, and Their Combination in Polyurethane-Forming Reaction

Studies of Catalyzed Reaction Mechanism Between Co-Polyether (thf/eo) and N-100 by Nmr - Interaction and Complex Formation Between Reactants and Catalysts

Study of E-51 Epoxy Resin Modified Bisphenol A Cyanate Ester Resins

Study on Cure Reaction of the Blends of Bismaleimide and Dicyanate Ester

COPOLYMERIZATION OF EPOXY AND CYANATE

Synergistic Catalysts of Lewis Acid and Brønsted Acid for Highly Efficient Preparation of Bisphenol Compounds

Synthesis of Bisphenol-A Polyarylester with Azobenzene Group by Interfaclal Polycondensation

The Study on Poly(ether Sulfone) Modified Cyanate Ester Resin and Epoxy Resin Cocuring Blends

ZnCl2-modified ion exchange resin as an efficient catalyst for the bisphenol-A production

Additional reaction and mechanism of dicyanobenzene: Formation of amidinium or amidine compounds

Zn Cl2-modified Ion Exchange Resin As an Efficient Catalyst for the Bisphenol-a Production

The Role of Hydroxy Substituent Position in Hydroxybenzonitrile Homologs on the Curing Behavior and Mechanical Properties of Cyanate Ester Resins

The Synthesis and Application of Bis(hydroxyethyl) Ether of Bisphenol A

Catalytic Polymerization of Phthalonitrile Resins by Carborane with Enhanced Thermal Oxidation Resistance: Experimental and Molecular Simulation