Abstract:Controlling foamability plays the central role in preparing PLA foams with high performances. To achieve this, chain extension was often used to improve the rheological property of PLA resins; however, despite the availability of this approach, it often deteriorates the biodegradability of PLA and greatly increases the processing cost and complexity. Hence, we reported a special crystallization induction method to design PLA foams with a tunable cellular structure and a high expansion ratio. A novel crystallization-promoting agent combination (D-sorbitol, CO2, and phenylphosphonic acid zinc salt) was used to induce PLA to enhance the chain interaction force and chain mobility and to provide crystallization templets. A series of PLAs with tunable stereocomplex (Sc)/α crystallinity and rapid non-isothermal crystallization ability were obtained. The effect of various crystallization properties on the foaming behavior of PLA was studied. The results demonstrated that proper crystallization conditions (a small spherulite size, a crystallinity of 6%, and rapid crystallization ability) could virtually contribute to the optimized cellular structure with the highest cell density of 4.36 × 106 cell/cm3. When the Sc crystallinity was above 10%, PLA had a superior foamability, which thereby resulted in a high foaming expansion ratio of 16.2. A variety of cellular morphologies of PLA foams could be obtained by changing the foaming temperature and the crystallization property. The proposed crystallization-induced approach provided a useful method for controlling the cellular structure and the performances of the PLA foams.

Preparation of Morphology-Controllable Microcellular Polylactide Acid by Supercritical Carbon Dioxide

Effect of Melt Viscosity on the Cell Morphology and Properties of Poly(lactic Acid) Foams

Study on Dyeing of PLA Fiber in Supercritical Carbon Dioxide

Microcellular Injection Molded Polylactic Acid/poly (Ε-Caprolactone) Blends with Supercritical CO2: Correlation Between Rheological Properties and Their Foaming Behavior

Thermal analysis of polylactic acid under high CO2 pressure applied in supercritical impregnation and foaming process design

Effect of Stereocomplexation on High-temperature Microcellular Foaming Behaviour, Compressive Property and Heat Resistance of Branched Poly(l-lactide)/poly(d-lactide)

Preparation and Supercritical CO2 Foaming of Modified Nanocrystalline Cellulose Reinforced Polylactic Acid Bionanocomposites

Controlled Foaming of Polycarbonate/polymethyl Methacrylate Thin Film with Supercritical Carbon Dioxide

Modeling and Experimental Validation of Cell Morphology in Microcellular-Foamed Polycaprolactone

Controlling cellular morphology by supercritical carbon dioxide

Regulating cell morphology of poly (lactic acid) foams from microcellular to nanocellular by crystal nucleating agent

Extruded polylactide bead foams using anhydrous supercritical CO2 extrusion foaming

Effect of Molecular Chain Mobility Induced by High-Pressure CO 2 on Crystallization Memory Behavior of Poly( d -lactic Acid)

Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization

Polylactic Acid Chemical Foaming Assisted by Solid-State Processing: Solid-State Shear Pulverization and Cryogenic Milling

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure

Flexibly Controlling the Polycrystallinity and Improving the Foaming Behavior of Polylactic Acid via Three Strategies

Apoptosis pathway signature for prediction of treatment response and clinical outcome in childhood high risk B-Precursor acute lymphoblastic leukemia.

Study on Foaming Properties of PLA/NCC Microcellular Foam Materials