Abstract:Cu-Mn/zeolite-Y catalysts prepared using a coprecipitation impregnation procedure have been investigated to develop active Cu-based catalysts for the dimethyl ether synthesis from syngas. A great enhancement of CO conversion and DME selectivity is observed on Mn-containing catalysts compared to its Mn-free counterpart. However, an excess addition of manganese suppresses the syngas-dimethyl ether (STD) activity. Manganese has been found to be interacting with copper to form copper manganese mixed oxides phase(Cu1+xMn2-xO4) upon calcinations, and the excess addition of copper or manganese will induce the segregation of copper or manganese as the isolated CuO or Mn2O3 phase, respectively. The segregates CuO phases enhanced the reducibility of the Cu1+xMn2-xO4 phase and the Mn2O3 phase by reducing spill-over species. Harder reduction of the mixed oxides leads to the formation of much smaller metallic Cu particles, and MnO remaines closely associated with copper particles after reduction treatment, acting as a site for stability against CO2 oxidation of the surface copper. Furthermore, it is found that addition of Mn to Cu/zeolite-Y catalyst decreases the average crystalline size of copper to the same extent. Combining the TPR and XRD analysis, it suggests that catalysts with the excess CuO phases in conjunction with copper manganese mixed oxides are much more active than that with excess Mn2O3 phases together with copper manganese mixed oxides in the hydrogenation of CO to DME.

STUDY OF Cu Mu CATALYST FOR THE SYNTHESIS OF METHYL FORMATE AND METHANOL FROM SYNTHESIS GAS

Study on the deactivation of catalysts for the synthesis of methyl formate directly from synthesis gas

INVESTIGATION ON ULTRAFINE Cu-Cr OXIDE CATALYSTS FOR SYNTHESIS OF METHANOL AND METHYL FORMATE AT LOW PRESSURE AND TEMPERATURE IN LIQUID PHASE——II.Effect of Mn Contents on the MF Selectivity of Catalysts

Concurrent synthesis of methanol and methyl formate catalyzed by copper-based catalysts - II. Influences of solvents and H2/CO mole ratios

Concurrent synthesis of methanol and methyl formate catalyzed by copper-based catalysts I. Influences of temperature and pressure

A study of Cu-Mn/SiO2 catalysts for methanol synthesis

Concurrent synthesis of methanol and methyl formate catalyzed by copper-based catalysts in a slurry phase

Concurrent synthesis of methanol and methyl formate catalyzed by copper-based catalysts - III. Influences of concentrations of catalysts and promoters

INVESTIGATION ON ULTRAFINE Cu-Cr OXIDE CATALYST FOR SYNTHESIS OF METHANOL AND METHYL FORMATE AT LOW PRESSURE AND TEMPERATURE IN LIQUID PHASE Ⅰ . Effect of Preparation Conditions on the Performance of Catalyst

Concurrent synthesis of methanol and methyl formate from synthesis gas catalyzed by copper-based catalysts IV. Influences of space velocity, reaction time and impurities as well as Cu-Cr molar ratios

Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Methanol and methyl formate synthesis from synthesis gas over cuprous chloride catalyst in liquid phase

A NOVEL PREPARETION OF Cu-Mn CATALYSTS FOR DIMETHYL ETHER SYNTHESIS FROM SYNGAS

A Cu-SiO2 Catalyst for Highly Efficient Hydrogenation of Methyl Formate to Methanol

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Comparative studies of manganese-doped copper-based catalysts: the promoter effect of Mn on methanol synthesis

Preparation and Characterization of Cu-Cr-M-O Catalyst for Synthesis of Methanol and Methyl Formate at Low Temperature in Slurry Phase

Effect of the Addition of Manganese and Zinc on the Properties of Copper-Based Catalyst for the Synthesis of Syngas to Dimethyl Ether

Characterization of Cu-Mn/Zeolite-Y Catalyst for One-Step Synthesis of Dimethyl Ether from Co-H-2

Catalysis for One-step Synthesis of Dimethyl Ether from Hydrogenation of CO