Abstract:Based on the infrared temperature measurement technology, this paper focuses on the model f(T) = integral(lambda 1R lambda Lb lambda)-R-lambda 2 (T)d(lambda) approximate to CTn. This model represents the response of blackbody radiation brightness on the detector in a certain wavelength range, which is called the blackbody waveband radiation brightness response in this paper. For different detectors, different wavelength ranges, different temperature ranges, there are different C and n. The value of n is difficult to obtain accurately. Most researchers used the three fitting results of C and n proposed by Inagaki T and Okamoto Y in 1996, and the results could not be well extended to any waveband detectors. In this paper, by using the Wien Approximation Formula to replace Planck's formula, the analytical formula of f(T) is theoretically derived which is a universal formula of f(T), so that we can obtain the blackbody waveband radiation brightness response f(T) in any waveband through theoretical calculations. The universal formula is applied in simulations. Simulation 1 : Integrate the universal formula in the whole waveband to obtain an analytical formula M-bb = 5. 238 5X 10(8), and compare it with Stephen Boltzmann' s law. The difference between the coefficient sigma = 5. 238 5 X 10(8) obtained by the universal formula and the Stefan Boltzmann constant sigma = 5. 667 9 X 10(8) is 0. 429 4 X 10(8). Simulation 2 : Acquire the spectral responsivity of the HgCdTe detector with an effective wavelength of 8 similar to 13 mu m from reference [2], calculate the blackbody wave-band radiation brightness response f(T) of the detector in the 8 similar to 13 mu m band, plot the result to compared with f(T)approximate to 0.136X sigma T-4.(09) shown in reference [2], and the results are basically the same. Two simulations illustrate the correctness of the analytical formula. On this basis, further experimental verification is performed. A surface source radiator in the laboratory was applied as the target. Through the universal formula, the emissivity of target epsilon can be calculated and compared with the reference value of true emissivity of target epsilon(0). Experimental results of the surface source radiator; epsilon(0) =0. 92 is the reference value of true target emissivity, epsilon(0) =0. 93 is measured value, the error of emissivity is 0. 01. The small error indicates that the model proposed in this paper can be used in the engineering practice of infrared temperature measurement technology. In this paper, a universal formula that can replace the model f(T)approximate to CTn is proposed. Compared with the original model, the greatest advantage of the universal formula is that it can be applied in any waveband without considering the temperature partition and it is a universality to calculate the blackbody waveband radiation brightness response by theoretical calculation. The universal formula further perfects the basic theory of infrared temperature measurement technology.

Calculation of Factor G in Measurement of Parameters of IRFPA Detectors

A New Method Of Calculating The Diffraction Efficiency For Diffraction/Refraction Infrared Hybrid System

Measurement of Diffraction Efficiency of Infrared Hybrid Optical System and Its Realization

Performance Parameter Test of IRFPA Used in Astronomy Imaging Detection

Application of Filter in Measuring Cutoff Wavelength of IRFPA Detectors

Test System for Measuring Characteristic Parameters of IRFPA

A Numerical Method to Analyze Geometric Factors of a Space Particle Detector Relative to Omnidirectional Proton and Electron Fluxes

Study and calculation of thermal conductance of thermal infrared detectors using finite element method

Imaging of the Mid-Infrared Focal Plane Array with a Modified Read-Out Circuit.

Research on column channel gain non-uniformity of simulate detector

A Time-Efficient Self-Test Method for Evaluating Thermal Parameters of Uncooled Infrared Detectors

Relative performance analysis of IR FPA technologies from the perspective of system level performance

Improved Intra-Pixel Sensitivity Characterization Based on Diffusion and Coupling Model for Infrared Focal Plane Array Photodetector

Performance of an Optimized Substrate-Free Focal Plane Array for Optical Readout Uncooled Infrared Detector

A Geometric Factor Calculation Method Based on the Isotropic Flux Assumption

The Calculate Method of Transform from IR to Voltage in Proximate Infrared Imaging Detector

An effective indicator for evaluation of wavelength extending InGaAs photodetector technologies

Analysis of the Nonlinearity of Cooled Infrared Detector

Universal Formula of Blackbody Waveband Radiation Brightness Response in the Infrared Temperature Measurement Technology

Measurement and Calculation of Waveband Responsivity and Detectivity

Modified Calculation Method of Relative Sensitivity for Fluorescence Intensity Ratio Thermometry