Removal of Gaseous Hydrogen Sulfide by a FeOCl/H 2 O 2 Wet Oxidation System
Xiubo Tian,Ying Chen,Yong Chen,Dong Chen,Quan Wang,Xiaohong Li
DOI: https://doi.org/10.1021/acsomega.2c00267
IF: 4.1
2022-02-25
ACS Omega
Abstract:The removal of gaseous hydrogen sulfide using FeOCl/H<sub>2</sub>O<sub>2</sub> was studied. The effects of the FeOCl dosage, the H<sub>2</sub>O<sub>2</sub> concentration, the reaction temperature, and the gas flow rate on the removal of H<sub>2</sub>S were investigated. The reaction products were analyzed, and the characterization of FeOCl was carried out by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and electron paramagnetic resonance spectroscopy. Furthermore, radical quenching experiments were carried out using butylated hydroxytoluene, isopropanol, and benzoquinone. It was found that the H<sub>2</sub>S removal rate for a H<sub>2</sub>S gas concentration of 160 ppm reached 85.6% when bubbling through 100 mL of an aqueous solution containing FeOCl (1 g/L) and H<sub>2</sub>O<sub>2</sub> (0.33 mol/L) at 293 K with a flow rate of 135 mL/min. Although the dissolution of chlorine in FeOCl was found to result in reduced catalytic performance, the activity was restored after soaking the catalyst in concentrated hydrochloric acid (37%) and subsequent calcination. The mechanism of H<sub>2</sub>S removal was also discussed, and it was found that this process was controlled by H<sub>2</sub>S diffusion. FeOCl was found to activate H<sub>2</sub>O<sub>2</sub> and produce radicals, such as <sup>•</sup>OH and <sup>•</sup>O<sub>2</sub> <sup>-</sup>, resulting in the formation of a water film rich in radicals on the FeOCl surface. Following the diffusion of H<sub>2</sub>S into the water film, it underwent oxidation by radicals to produce SO<sub>4</sub> <sup>2-</sup>. Overall, the catalyst and the product can be effectively separated.
chemistry, multidisciplinary