Abstract:The utilization of nanofluid is found to considerably enhance the heat transfer performance. The present study fabricated a hybrid Al2O3-CuO/water nanofluid and investigated its turbulent thermal and flow performance in a circular tube. Experimentally, the heat transfer coefficient and pressure drop of hybrid nanofluids with mass concentrations ranging from 0.5% to 3% were measured under different Reynolds number. The effect of selection of thermophysical property models on performance was also concerned. Numerically, Computational Fluid Dynamics (CFD) simulations based on Discrete Phase Model (DPM), mixture and Eulerian multiphase model were conducted and compared. Results reveal a relative enhancement of 2%-35% in heat transfer performance of hybrid nanofluid under various flow rates. In addition, the enhancement tends to increase with the increment of nanofluid concentration and decrement of flow rate. The pressure drop also shows different degrees of enlargement up to 12%. Different thermophysical property models lead to different Nusselt and Reynolds numbers, which results to various levels of deviations among different models. Generally, the thermal and flow characteristics adopting different models have similar trend but different magnitudes. By selecting certain models, the thermal performance factor has a value in the range of 1.01-1.29 and shows an increment with the increase of concentration and decrease of Reynolds number. The developed CFD models show desirable prediction accuracies for experimental heat transfer coefficient but seriously underestimate the pressure drop. Specifically, the Eulerian model exhibits the smallest deviation of 8.1% with the experimental heat transfer coefficient followed by the mixture model and DPM with the derivations of 10.2% and 12.5% respectively. The present study can help to understand the heat and flow behaviour of hybrid nanofluid in heat transfer devices.

Study on Cylinder Head Cooling Using Nanofluid Coolant with Jet-Flow Method

Study of Different Cooling Structures on the Thermal Status of an Internal Combustion Engine

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Experimental investigation of submerged single jet impingement using Cu–water nanofluid

Experimental Investigation Of Submerged Impinging Jet Using Cu-Water Nanofluid

A Review on Experimental and Numerical Investigations of Jet Impingement Cooling Performance with Nanofluids

The suppressive effect of supraoptimum doses of antigen on the secondary antibody-forming response of spleen cells cultured in cell-impermeable diffusion chambers.

Experimental study on transient and steady-state impinging jet cooling condition with TiO2-Water nanofluids

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Experimental study on heat transfer of nanofluids in a vertical tube at supercritical pressures

Thermal and hydraulic characteristics of a single reverse nanofluid jet in a double-wall cooling configuration

Experimental Study to Improve the Hydrodynamic and Thermal Efficiencies of a Cross-Flow Car Radiator Using a New Prepared Hybrid Nanofluid Composed of Graphene Oxide and Silicon Oxide Nanoparticles Dispersed in Water–Ethylene Glycol Fluid

Experimental study on cooling performance of nanofluid flow in a horizontal circular tube

Turbulent heat transfer and flow analysis of hybrid Al2O3-CuO/water nanofluid: An experiment and CFD simulation study

Analytical and Experimental Study of Nano Particles Effect in Engine Cooling System

Experimental study on flow boiling heat transfer augmentation of novel zinc oxide coated copper hybrid nanofluids

Study the effect of hot fluid flow rate and carbon nanotube–water on the performance of nanofluid in gasketed plate heat exchanger

Experimental Study of Heat Transfer During Quenching of Steel Cylinders in Boiling Nanofluid

Artificial neural network and numerical analysis for performance enhancement of hybrid microchannel-pillar-jet impingement heat sink using Al2O3-water and CuO-water nanofluids

Study on the flow and heat transfer characteristics of a hybrid nanofluid jet impingement microchannel heat sink with airfoil fins

Experimental investigation on alumina nanofluids in vehicle heat exchanger