Analytical and Experimental Study of Nano Particles Effect in Engine Cooling System

Ebisa Kejela,Prof. Rajendiran Gopal

DOI: https://doi.org/10.55529/jecnam.41.48.66

2023-12-16

Journal of Electronics,Computer Networking and Applied Mathematics

Abstract:Water is the conventional coolant in the IC engine cooling system. The most recent developments in nanotechnology have led to improvements in the original uses of Nanoparticles in car engine cooling systems. In this study, Nano fluids formed by using kinds of nanoparticles 〖Al〗_2 O_3 and 〖TiO〗_2 were added to the four-stroke internal combustion engine radiator and compared with the conventional coolant (pure water). The purpose of adding these nanoparticles to base fluid is to improve thermal conductivity of the coolant. First base water is used as coolant and simulation is carried out. Then 〖Al〗_2 O_3 and 〖TiO〗_2 nanoparticles had added in base fluid as coolant and CFD fluent simulation is carried out. The result shows that Nanoparticles of 2% 〖Al〗_2 O_3 is 15.04% enhancement of heat transfer than base fluid and 4% 〖Al〗_2 O_3 increases heat transfer rate to 21.28% while 2% of 〖TiO〗_2 is 14.28%enhancement of heat transfer compared to base fluid and 4% TiO2 increases the rate of heat transfer to 18.69%. 〖Al〗_2 O_3 Nanoparticles shows better result than 〖TiO〗_2 and concentration of nanoparticles has a positive effect on the heat transfer rate of the cooling system. The experimental investigation on stability Nanoparticles dispersion through visualization and UV. visible spectroscopy absorbance measurement is carried out on 〖Al〗_2 O_3 Nano fluid prepared by pH modification and pH~7.5 is relatively more stable. Experiments are performed with pure water and Nanoparticles in coolant separately and results showed that 0.02 concentration of Nanoparticles enhances heat transfer rate by 17.5%. Increases the concentration of nanoparticles and flowrate leads to increases heat transfer rate which leads to improved radiator performance.