Abstract:The costs involved in the design, manufacture, certification and maintenance of a helicopter have grown over the past few years. In the certification phase of embedded systems, their safety levels and their performance requirements are verified. The helicopter engine is a system that must be reliable and capable of providing the necessary power to produce lift and controllability for the aircraft. In this work was developed a computer model to evaluate the helicopter engine's performance under any flight conditions and the pilot's inputs. The developed software was incorporated as a module in a flight test simulator at the Flight Tests and Research Institute (IPEV) which belongs to the Brazilian Air Force. This simulation tool allows foreseeing and investigating possible situations that may occur during actual flight tests, improving safety and reducing costs. Using MATLAB® Simulink, it was possible to run at the same time: an iterative and a non-iterative methodology, a control system to set the fuel flow schedule, based on several inputs generated from the thermodynamic model. Based on classic thermodynamics laws and differential equations, the particularities due to the helicopter application were adjusted: the influence of the pilot's commands; performance requirements; running line control; and the fuel flow control system. The simulation results were compared with commercial gas turbine performance simulation software and with the data provided by the IPEV in five real flight tests. These data were also used for obtaining engine output power requirements according to collective stick position.

Semi-physical Simulation on Integrated Helicopter/engine Control System

Collaborative Simulation and Integrated CMAC and PID Optimization and Control of an Aerial Work Platform

Generalized predictive adaptive control and combination of simulation of aerial work platform

A Gradient Optimization Based PID Tuning Approach on Quadrotor

An Integrated Controller Design for a Small Aero-Engine

Research on Integrated Control Method of Coaxial High-Speed Helicopter/Engine Based on Power Prediction Feedforward

Semi-physical Simulation Test-bed for Electro-hydraulic Proportional Pitch-controlled Wind Turbine System Based on Bladed

Full control of a quadrotor using parameter-scheduled backstepping method: implementation and experimental tests

A Hybrid Control Method for an Unmanned Scale Helicopter Attitude

Helicopter engine simulation using flight test data

Control System Design and Flight Testing for a Miniature Unmanned Helicopter

Design and Implementation of Helicopter Drive Control Simulation System

Adaptive compensated dynamic inversion control for a helicopter with approximate mathematical model

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Embedded Design for Engine Rotating Speed Control System of Unmanned Helicopter

Real-time optimization control of variable rotor speed based on Helicopter/ turboshaft engine on-board composite system

DESIGNING AND IMPLEMENTING 3-DIMENSIONAL ANIMATION SIMULATION PLATFORM FOR HELICOPTER FLIGHT CONTROL SYSTEM

Research on Integrated Control Method for Helicopter/Turboshaft Engine with Variable Rotor Speed Based on the Error Between Engine Required and Real Output Torque

Study on Modeling and Simulation of a Flight Simulator Engine System

Flight-Propulsion Integration Dynamic Analysis and Adaptive Control of the Hypersonic Vehicle at Wide-Range Mach Numbers

Hardware-in-the-loop Simulation of Flight Mach Fuzzy Controller.