Abstract:Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Ahead of Print. In order to address the limitation of fixed-ratio transmission (FRT), which compromises the attainment of both optimal main rotor speed and optimal power turbine speed, an optimal speed control method based on hybrid variable speed (HVS) is proposed. Firstly, based on the integrated performance calculation model of helicopter/turboshaft engine system, the distribution factors of variable speed are applied, and the integrated optimization method of optimal speed is proposed based on the minimum engine fuel flow. Subsequently, an online estimation technique employing a high-order filter is devised and engineered to achieve superior cascaded control of turboshaft engines. Finally, a novel real-time optimal speed control method based on hybrid variable speed is proposed. The simulation results under different operation conditions demonstrate that regardless of whether it is FRT or HVS, the optimal main rotor speed increases with forward velocity. In the case of HVS, turboshaft engine degradations have a significant impact on the optimal power turbine speed rather than optimal main rotor speed. Adopting an estimation method based on high-order filtering for gas turbine rotational acceleration proves more advantageous in mitigating high-frequency oscillation and continuous saltation of estimated values. Moreover, in comparison with the optimal speed control method of FRT, HVS-based approach enables simultaneous attainment of the optimal main rotor speed and power turbine speed, thereby enhancing the overall efficiency of the integrated helicopter/turboshaft engine system and significantly decreasing engine fuel consumption by over 2%. Consequently, there has been a remarkable enhancement in the overall performance of the integrated helicopter/turboshaft engine system.

Embedded Design for Engine Rotating Speed Control System of Unmanned Helicopter

Intelligent Rotor Speed Controller for a Mini Autonomous Helicopter.

Control System Design and Flight Testing for a Miniature Unmanned Helicopter

Hierarchical Hybrid Control System of Small Unmanned Helicopter

Real-time optimization control of variable rotor speed based on Helicopter/ turboshaft engine on-board composite system

Control and implemention on coordinated turn of miniature unmanned helicopter

Research on Integrated Control Method for Helicopter/Turboshaft Engine with Variable Rotor Speed Based on the Error Between Engine Required and Real Output Torque

Design and Implementation of Helicopter Drive Control Simulation System

Research on Integrated Control Method of Coaxial High-Speed Helicopter/Engine Based on Power Prediction Feedforward

An Integrated Controller Design for a Small Aero-Engine

The Design and Implementation of Asynchronous-Communications in Flight Controlling Computer for Unmanned Scale Helicopter

Robust Control Of Vertical Flight And Rotor Speed For Mini-Helicopter

Design and Realization of Attitude Stability Augmentation Control System for Mini Unmanned Helicopter

Design and Hardware-in-the-loop Simulation of MUAV's Flight Control System

Design and Research of a Aero Engine Operating Status Monitoring System

A Hybrid Control Method for an Unmanned Scale Helicopter Attitude

Optimal control for helicopter/turboshaft engine system based on hybrid variable speed

Development of Automatic Control System for Longitudinal Attitude of Pilotless Helicopter

Design and Verification of Aeroengine Rotor Speed Controller Based on U-LADRC

An Analytical Design Optimization Method for Electric Propulsion Systems of Multicopter UAVs with Desired Hovering Endurance

Design and Application of an Electric Tail Rotor Drive Control (ETRDC) for Helicopters with Performance Tests