Abstract:Electron beam welding technology is increasingly used in industrial manufacturing due to its high power density and the purity of welded joints. In vacuum environments, traditional optical and machine vision monitoring methods are susceptible to contamination by metal vapors, which hinders the monitoring effect. Due to the limitations of optical monitoring methods, electronic optical imaging technology is a new alternative monitoring method that has been introduced into the electron beam processing in recent years, but the complexity of the industrial electron beam welding environment makes it relatively less studied in the field of electron beam welding. In this study, a YAG scintillator detector is proposed to collect the backscattered electron information generated by the interaction of electrons with the sample, and an FPGA real-time processing system is used to realize the weld quality monitoring in the industrial electron beam welding processes. The distribution law of backscattered electrons in space is simulated by Monte Carlo method, and the results show that the number of distribution in the angle region is more, the backscattering coefficient increases with the increase of the incident angle of the electron beam, and the backscattering coefficient of the samples with large atomic numbers is relatively high. The field monitoring experiments show that the designed system exhibits good sensitivity to the characteristic morphology, and the imaging resolution reaches more than 200 μm, and the weld hole defects are clearly visible. A good linear correlation between the current change curve during scanning and the actual shape profile is shown, while the image resolution is better when the spot current is 1mA.

Research on Electron Beam Welding of a Slow-wave Line Forming Method

Research on electronic optical monitoring technology and system design for vacuum electron beam welding process

Development of precision numericed controlled high vacuum electron beam welding machine

Research on the V-Shape Folded Rectangular Groove Slow-Wave Structure

Development of electron optical capabilities for manufacturing of large components by electron beam welding

Design and test of a low voltage suspended dual-microstrip meander-line slow wave structure at Ka band

Mathematical modelling of waveguide paths by electron-beam welding

A Novel Microstrip Meander-Line Slow Wave Structure for Millimeter-Wave TWT

Research status on keyhole of electron beam deep penetration welding

Nano-welding and Nano-Cutting with an Electron Beam

W-band Dual-Sheet Beam Traveling-Wave Tube with a Novel Planar Slow-Wave Structure

Precise Extrusion Process of E Shaped Waveguide Component for Radar Use

A Novel Ridge-Vane-Loaded Folded-Waveguide Slow-Wave Structure for 0.22-Thz Traveling-Wave Tube

Investigation of a Novel Planar Meander Slot-Line Slow-Wave Structure

Study on a Novel Dual-Beam Flat-Roofed Sine Waveguide Traveling-Wave Tube

Study on W-band Sheet Electron Beam Sine Waveguide Traveling-Wave Tube

Scanning Method of Filling Lines in Electron Beam Selective Melting

Simulation and Experimental Investigation on W-Band Suspended Ridged Loaded Microstrip Meander Line Slow Wave Structure

Electron beam machining of microsystem products

U-Shaped Meander-Line Slow-Wave Structure with Stub-Loading

A Novel V-Shaped Microstrip Meander-Line Slow-Wave Structure for W-band MMPM