Abstract:In order to obtain the performances of composite laminates under low-velocity impact through the dis-placement of impacted point,the displacement and velocity for the back of impacted point were measured by high-speed laser displacement sensors during drop weight impact test of laminates firstly.Then,based on spring-mass impacted model,the impacted contact load was calculated by the displacement of impacted point,and the parameters of spring-mass model were calibrated with non-destructive impact test.After that,the contact load during the im-pact process with damage happening was simulated,the time of delamination initiated was j udged by the testing ve-locity response of impacted point,and the delamination threshold load was obtained by simulated results.Finally, the reduction for flexural rigidity of laminate was conducted according to the result of non-destructive test,the con-tact load and energy absorption curves after impact damage initiated were calculated using spring-mass model,the real-time depth of indentation was calculated by the displacements of impactor and back of impacted point.The re-sults show that when the structure is impacted and delamination initiates,violent vibration for the velocity of impact-ed point appears due to the sudden reduction of laminate rigidity.This phenomenon can be used as the recognition characteristic for the delamination damage of structure initiating.The calculated results for contact load and energy absorption curves after the impact damage initiated coincide with the measured results of tests.The varying tendency for the real-time depth of indentation with the impact energy obtained by calculation is in accords with the varying tendency for the depth of indentation measured after impact.These results indicate that the proposed method based on non-contact measurement technology can be applied to analyze the impact performances of laminates under the condition that contact load can not be measured directly.

Development of a Portable Drop-weight Impact Testing Machine

Drop-Weight Impact Measurement System Based on LabVIEW

Development of Structural Testing Equipment for Impact and Complex Loading

Contact Force Measurement and Response to Damage of Composite Laminates Subjected to Small-mass Impact

Development of Portable Ultrasonic Non-Destructive Test System for Viod Content of Carbon-Fiber Reinforced Plastics

Performance analyses of laminates subj ected to low velocity impact based on non-contact measurement displacement

LOW-VELOCITY IMPACT RESPONSE OF COMPOSITE LAMINATE AND ITS RELATIONSHIP WITH DAMAGE PARAMETERS

Simulation and Experiment of Hand-held Vacuum Cleaner Host Drop

Drop-weight impact testing for the study of energy absorption in automobile crash boxes made of composite material

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

Contact Force Measurement And Delaminating Responses Of Composite Laminate Subjected To Small-Mass Impact

Impact Analysis of Impact Test Machine Based on LS-DYNA

EXPERIMENTAL STUDY OF IMPACT FORCE OF A LOW-SPEED DROPLET COLLIDING ON THE SOLID SURFACE AT DIFFERENT IMPACT ANGLES

Localizations and force reconstruction of low-velocity impact in a composite panel using optical fiber sensors

Full-field Dynamic Response of Low-Velocity Impact on an Elastic Plate Using 3D Digital Image Correlation

Development of Multi-work Condition Declivitous Impact Testing System

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

DROP IMPACT ONTO A CANTILEVER BEAM: BEHAVIOR OF THE LAMELLA AND FORCE MEASUREMENT

A Novel Impact Tester for in Situ Evaluating the Shock Reliability of Micro-Structures

Impact Damage Detection in Composite Laminates Using PVDF and PZT Sensor Signals

A Novel Methodology to Research the Residual Compressive Mechanical Properties of Composite Stiffened Panel after Low Velocity Impact Based on Quantification Damage Simulation